Physics, 20.03.2020 08:18 catiehohman13

We want to construct a solenoid with a resistance of 4.30 Ω and generate a magnetic field of 3.70 × 10−2 T at its center when applying 4.60 A of electrical current. We want to use copper wire with a diameter of 0.500 mm. If we need the solenoid's radius to be 1.00 cm, how many turns of wire will be need? 2 78 256 790 Then, what would be the required length of the solenoid? 12.3 cm

Answers: 1

Show answers

Answers

Answer from: kbrxxzy

Answer with Explanation:

We are given that

Resistance of solenoid,R=4.3 ohm

Magnetic field,B= $3.7\times 10^{-2} T$

Current,I=4.6 A

Diameter of wire,d=0.5 mm= $0.5\times 10^{-3} m$

Radius of wire,r= $\frac{d}{2}=\frac{0.5\times 10^{-3}}{2}=0.25\times 10^{-3} m$

$1mm=10^{-3} m$

Radius of solenoid,r'=1 cm= $1\times 10^{-2} m$

$1 cm=10^{-2} m$

Resistivity of copper, $\rho=1.68\times 10^{-8}\Omega m$

We know that

$R=\frac{\rho l}{A}$

Where $A=\pi r^2$

Using the formula

$4.3=\frac{1.68\times 10^{-8}\times l}{\pi(0.25\times 10^{-3})^2}$

$l=\frac{4.3\times \pi(0.25\times 10^{-3})^2}{1.68\times 10^{-8}}=50.23 m$

Number of turns of wire= $\frac{l}{2\pi r'}$

Number of turns of wire= $\frac{50.26}{2\pi(1\times 10^{-2}}=800$

Hence, the number of turns of the solenoid,N=799

Magnetic field in solenoid,B= $\mu_0 nI$

$3.7\times 10^{-2}=4\pi\times 10^{-7} n\times 4.6$

$n=\frac{3.7\times 10^{-2}}{4\times 3.14\times 10^{-7}\times 4.6}$

n=6404 turns/m

$n=\frac{N}{L}$

$L=\frac{N}{n}$

$L=\frac{799}{6404}$

$L=0.125 m=0.125\times 100=12.5 cm$

Length of solenoid=12.5 cm

1m=100 cm

Answer from: Quest

bacteria that live on the ocean floor are sustained by phytoplankton. phytoplankton, microscopic marine photosynthetic organisms, have a vastly significant role to play not only in the marine food web of which they’re part of, but also on a more global scale. despite their infinitely small size in comparison to other marine organisms, these tiny creatures occupy an immensely important ecological niche: they are the foundation of the marine food web, and as primary producers, play key roles in supporting all other organisms in the marine environment, as well as in the regulation of the earth’s climate through the sequestration of carbon, oxygen production, and other related processes. phytoplankton account for roughly half of all global primary productivity; therefore, their significance extends far beyond the marine environment alone. there is an intriguing sense of irony in the realization that these tiny living beings that often live out their existence unnoticed and undetected by the rest of the world, have such a far-reaching impact on the lives of virtually all other living organisms on the planet, particularly on those in the marine environment. the world that we have become accustomed to has been and is continuously shaped by the workings of these miniscule yet vital “plants of the sea”.

hope this !

Answer from: Quest

the answer is false. this is because for ice to melt, it requires latent heat of melting. latent heat means heat energy required to change phase without any increase in temperatures. therefore, the ice will take energy from the environment to melt hence atmospheric temperatures will reduce.

Another question on Physics

Physics, 22.06.2019 06:30

Which one of the following research methods can show cause and effect

Answers: 1

Answer

Physics, 22.06.2019 12:30

An ice-making machine inside a refrigerator operates in a carnot cycle. it takes heat from liquid water at 0.0 degrees celsius and rejects heat to a room at a temperature of 19.2 degrees celsius. suppose that liquid water with a mass of 76.3kg at 0.0 degrees celsius is converted to ice at the same temperature. take the heat of fusion for water to be l_f = 3.34*10^5 j/kg.how much energy e must be supplied to the device? express your answer in joules.

Answers: 1

Answer

Physics, 22.06.2019 16:40

Beryl states that insulation with the smallest possible thermal conductivity is best to keep a house warm in winter, but worst for keeping a house cool in summer. sapphire insists the reverse is true: low thermal conductivity is good in the summer, but bad in the winter. which one, if either is correct? a. beryl, because low thermal conductivity results in low heat transfer. b. beryl, because low thermal conductivity results in high heat transfer. d. sapphire, because low thermal conductivity results in high heat transfer. e. neither, because low heat transfer is desirable both in summer and in winter.

Answers: 2

Answer

Physics, 22.06.2019 18:00

Athin nonconducting rod with a uniform distribution of positive charge q is bent into a circle of radius r. the central perpendicular axis through the ring is a z-axis, with the origin at the center of the ring. a) what is the magnitude of the electric field due to the rod at z = 0? n/c (b) what is the magnitude of the electric field due to the rod at z = infinity? n/c (c) in terms of r, at what positive value of z is that magnitude maximum? r (d) if r = 4.00 cm and q = 9.00 µc, what is the maximum magnitude? n/c

Answers: 1

Answer

You know the right answer?

We want to construct a solenoid with a resistance of 4.30 Ω and generate a magnetic field of 3.70 ×...

Questions