Consider a regenerative gas-turbine power plant with two stages of compression and two stages of expansion. The overall pressure ratio of the cycle is 9. The air enters each stage of the compressor at 300 K and each stage of the turbine at 1200 K. Accounting for the variation of specific heats with temperature, determine the minimum mass flow rate of air needed to develop a net power output of 110 MW.

1. may 2. september 3. february, and december4. 70°f

Ohm's law tells you that i = v/r where v is equivalent voltage and r is equivalent resistance of the circuit
since all circuits have the same voltage, your question is really asking which circuit has the lowest total resistance, since the lower the resistance, the higher the current
circuit a has a resistance of 5 ohms; circuit c is in series so has a resistance of 10 ohms; circuit b is in parallel and therefore has a resistance of 2.5 ohms (review your notes on adding resistances in parallel and series); therefore b has the highest current

Well it depends on the object or substance

Sounds propagates through some kind of medium. usually it's air, but it goes just as well through solid objects like walls, windows etc. a soundwave will compress the (air)molecules in front of it, and if this increased density wave hits your ears, you register it as sound. solid objects like walls are a lot denser than air, this means that they will damp a wave, but also carry it easier.