Physics, 11.03.2020 05:27 xojade

Two objects with masses represented by m1 and m2 approach each other on a horizontal frictionless table with the same constant speed, v0, as measured by a laboratory observer. The objects undergo a perfectly elastic collision, and it is observed that after the collision, m2 moves off in a direction opposite its original motion with some constant speed v, and m1 is stationary.

(a) Determine the ratio of the two masses, m1/m2.

(b) Determine the ratio of their speeds, v/v0.

Answers: 1

Show answers

Another question on Physics

Physics, 22.06.2019 15:20

Acarpenter builds an exterior house wall with a layer of wood 2.9 cm thick on the outside and a layer of styrofoam insulation 2.3 cm thick on the inside wall surface. the wood has k=0.080w/(m⋅k), and the styrofoam has k= 0.010 w/(m⋅k). the interior surface temperature is 19.0 ∘c , and the exterior surface temperature is -15.0 ∘c . a.)what is the temperature at the plane where the wood meets the styrofoam? celsius b.)what is the rate of heat flow per square meter through this wall? /m^2

Answers: 2

Answer

Physics, 22.06.2019 17:20

The magnitude of the magnetic field at a certain distance from a long, straight conductor is represented by b. what is the magnitude of the magnetic field at twice the distance from the conductor? a. at twice the distance, the magnitude of the field is 4b.b. at twice the distance, the magnitude of the field is 2b.c. at twice the distance, the magnitude of the field is b/2.d. at twice the distance, the magnitude of the field is b/4.e. at twice the distance, the magnitude of the field remains equal to b.

Answers: 3

Answer

Physics, 22.06.2019 18:50

Avertical clean glass piezometer tube has an inside diameter of d = 1 mm and is used to measure pressure in a horizontal pipe carrying water as shown. due to pressure in the pipe, the water at 20c rises into the tube to a height h. if the water pressure in the pipe is p = 500 pa gauge, estimate the height h: (a) without considering surface tension (b) with surface tension (capillary) effects. the contact angle  can be assumed at 30 deg

Answers: 2

Answer

Physics, 22.06.2019 20:50

Asquare 1m x 1m plate is shown below. all four of its edges are kept at 0 co. at t=0the temperature distribution is given by: y xtsins n75)=.a) using separation of variables determine the temperature distribution t(x,y,t)along the plate at any time t.b) discretize the heat conduction equation +=22222 txtusing a second-order centered difference scheme for the two second derivatives and a first-order forward euler scheme for the first derivative. using von neumann stability analysis, determine the stability criterion for the proposed discretization scheme in terms of , hand t. solve for the maximum allowable time step tmax

Answers: 1

Answer

You know the right answer?

Two objects with masses represented by m1 and m2 approach each other on a horizontal frictionless ta...

Questions