Physics, 10.03.2020 09:30 pr47723

A 5-mm-thick stainless steel strip (k = 21 W/m·K, rho = 8000 kg/m3, and cp = 570 J/kg·K) is being heat treated as it moves through a furnace at a speed of 1 cm/s. The air temperature in the furnace is maintained at 840°C with a convection heat transfer coefficient of 80 W/m2·K. If the furnace length is 3 m and the stainless steel strip enters it at 20°C, determine the surface temperature gradient of the strip at mid-length of the furnace. (Round the final answer to the nearest whole number.)

Answers: 1

Show answers

Answers

Answer from: hartmaaj95

1170 Kelvin/meter

Explanation:

See attached pictures.

A 5-mm-thick stainless steel strip (k = 21 W/m·K, rho = 8000 kg/m3, and cp = 570 J/kg·K) is being he

Answer from: Basicwhitegirl1

The surface temperature gradient is given as 1170.137 K/m

Explanation:

In to obtain the surface temperature gradient we need to obtain the characteristics length and the formula for this is

$L_c = \frac{V}{A_s}$

Where V is the volume of the ball and A_s is the surface area of the particle

Now let assume a one-dimensional heat transfer and that width of the strip is negligible

Hence the surface area would be the two opposite surface of the strip which means that the volume is obtained by multiplying surface area and the thickness

Mathematically

V = A *L

and A_s =2A

Substituting this into the formula above

$L_c = \frac{(A*L)}{(2A)}$

$=\frac{L}{2}$

Note that L in this equation is the thickness of the plate and from the question it is equal to 5 mm

$L_c = \frac{5}{2} = 2.5 \ mm$

In order to obtain the temperature of the gradient of the strip we need to obtain the temperature of the strip at mid-length of the furnace

and the formula is

$e^{-bt} = \frac{T(t)-T_\infty }{T_i-T_\infty}$

Where $T_\infty$ is the ambient temperature = 900 °C

T_i is the initial temperature = 20 °C

is obtained with the formula

$b =\frac{hA_s}{\rho C_p V}$

replacing V with A_s * L_c

$b = \frac{hA_s}{\rho C_p L_c}$

$=\frac{h}{\rho C_p L_c}$

Where h is the heat transfer coefficient $\rho$ is the density , C_p is the specific heat at constant pressure and L_c is the characteristics length

Substituting

$80 \ W/m^2\cdot K \ for \ h \ 8000kg /m^3 \ for \ \rho , \ 570J/kg \ \cdot K \ for \ C_p \ and \\\\2.5mm \ for L_c$

$b = \frac{80}{y(8000)* 570 * [2.5 \ mm}\frac{10^{-3 }m}{1mm} ]}$

$=\frac{80} {8* 570* 2.5}$

$= 0.007017 \ s^{-1}$

t is the of the stainless-steel strip being heated and the formula is

$t = \frac{(I_f/2)}{v}$

Where I_f is the length of the furnace , and v is the speed

Substituting 3 m for I_f and 1 cm/s for v

$t =\frac{(3/2)}{[1 cm/s \ * \frac{10^{-2}m}{1cm} ]}$

$= \frac{1.5}{10^{-2}}$

= 150s

Substituting the obtained value into the formula for temperature of strip at mid-length of the furnace we have

$e^{(-0.007017 s^{-2})(150s)} = \frac{T(t)- 900}{20 - 900}$

$T(t) = 900 + (20-900) (e^{(0.007017)(150)})$

=592.839 °C

Now to obtain the surface temperature gradient of the strip at mid-length of the furnace we would apply this formula

$h = \frac{-k[\frac{\delta T}{\delta y} ]_{y=0}}{T(t)-T_{\infty}}$

=> $[\frac{\delta T}{\delta y} ]_{y=0}} =\frac{h}{k} (T(t) - T_{\infty})$

Where h is the convection heat transfer coefficient

Where $[\frac{\delta T}{\delta y} ]_{y=0}}$ is the surface temperature gradient of the strip at mid-length of the furnace

T(t) is the temperature of the strip at mid-length of the furnace , $T_{\infty}$ the ambient temperature and k is the thermal conductivity

$Substituting \ 80 \ W/m^2 \cdot K for h \ , \ 592.839 ^oC \ for \ T(t) \ , \ 900 ^o C\\for \ T_{\infty } \ and \ 21 W/m \ \cdot \ K \ for \ k$

$[\frac{\delta T}{\delta y} ]_{y=0}} =-\frac{80}{21} (592.839 -900)$

=1170.137 K/m

Answer from: Quest

b.a device that inputs heat into a cool object

Answer from: Quest

the answer to this is proletariats.

hope this : )

Another question on Physics

Physics, 22.06.2019 06:40

How does the kinetic energy of a charge change as the charge moves under the effect of an electric field from higher potential to lower potential? a.the kinetic energy increases.b.the kinetic energy decreases.c.the kinetic energy remains the same.d.the kinetic energy is always zero.

Answers: 1

Answer

Physics, 22.06.2019 07:50

Imagine you are standing in the antarctic during the southern hemisphere summer. the sky is clear and blue. there are no clouds in the sky. your shadow is cast on the icy ground. what is the color of the shadow?

Answers: 1

Answer

Physics, 22.06.2019 08:20

The bubba chump shrimp company processes and packages shrimp for sale to wholesale seafood distributors. the shrimp are transported to the main plant by trucks that carry 1,000 pounds (lb) of shrimp. once the continuous flow processing of the shrimp begins, no inventory is allowed in buffers due to spoilage and all of the shrimp must be processed within 12 hours to prevent spoilage. the processing begins at the sorter, where the trucks dump the shrimp onto a conveyor belt that feeds into the sorter, which can sort up to 500 lb per hour. the shrimp then proceed to the desheller, which can process shrimp at the rate of 400 lb per hour. however, after 3 hours and 45 minutes of processing, the desheller must be stopped for 15 minutes to clean out empty shrimp shells that have accumulated. the veins of the shrimp are then removed in the deveining area at a maximum rate of 360 lb per hour. the shrimp proceed to the washing area, where they are processed at 750 lb per hour. finally, the shrimp are packaged and frozen. what is the daily process capacity of the processing plant (excluding the packaging and freezing)?

Answers: 2

Answer

Physics, 22.06.2019 18:30

Against his financial advisor's advice, frank has decided to invest his money in some risky stocks because he once made quite a bit of money in the stock market. his decision illustrates a. the representativeness heuristic b. overconfidence c. the availability heuristic d. confirmation bias select the best answer from the choices provided

Answers: 3

Answer

You know the right answer?

A 5-mm-thick stainless steel strip (k = 21 W/m·K, rho = 8000 kg/m3, and cp = 570 J/kg·K) is being he...

Questions

Physics, 06.09.2020 14:01

A position vector in the first quadrant has an x-component of 18 m and a magnitude of 30 m. What is the value of its y-component?...