A telephone lineman is told to stretch the wire between two poles so the poles exert an 800Nforce on the wire. As the lineman does not have a scale to measure forces, he decides to measure the speed of a pulse created in the wire when he hits it with a wrench. The pulse travels 60m from one pole to the other and back again in 2.6s. The 60m wire has a mass of 15kg. a. Should the wire be tightened or loosened?b. Should the wire be tightened or loosened?

The wire should be tightened because the current tension on the wire is less than the required tension.

The given parameters;

The speed of the wave as the pulse traveled from one pole to the other two times, is calculated as follows;

The tension created on the wire during the pulse motion is calculated as follows;

The current tension on the wire (532.55 N) is less than the required tension of 800 N. Thus, the wire should be tightened.

Learn more about tension on wire here: link

The wire should be tightened because the present tension is 532.54 N where the required tension is 800 N and the higher the tension the more tightening is required.

Explanation:

To solve the question

v = where

v = velocity of the pulse in the string = 46.154 m/s

= Required tension force = 800 N

m = Mass of the wire = 15 kg

L = length of the wire to be tension-ed = 60 m

Since the pulse travels twice the distance of 60 m in 2.6 s the velocity is given by

v = 2×60/2.6 = 46.154 m/s

Therefore making the subject of the formula and substituting the values, we have

= = = 532.54 N

This means that, as it is, the present tension in the wire is 532.54 N which is less than  the required 800 N, therefore the wire should be tightened

a. carbon monoxide from car exhaust

b.particulate matter, such as soot

c.water vapor from a factory smokestack

d.acid rain

these are the answer choices im on that question right now