Physics, 04.03.2020 23:42 Fedaca5

A tugboat tows a ship with a constant force of magnitude F1. The increase in the ship's speed during a 10 s interval is 3.0 km/h. When a second tugboat applies an additional constant force of magnitude F2 in the same direction, the speed increases by 11 km/h during a 10 s interval. How do the magnitudes of F1 and F2 compare? (Neglect the effects of water resistance and air resistance.)

Answers: 2

Show answers

Answers

Answer from: tchocho8621

The magnitude of F₁ is 3.7 times of F₂

Explanation:

Given that,

Time = 10 sec

Speed = 3.0 km/h

Speed of second tugboat = 11 km/h

We need to calculate the speed

$v_{1}=\dfrac{3.0\times10^{3}}{3600}$

$v_{1}=0.833\ m/s$

The force F₁is constant acceleration is also a constant.

$F_{1}=ma_{1}$

We need to calculate the acceleration

Using formula of acceleration

$a_{1}=\dfrac{v}{t}$

$a_{1}=\dfrac{0.833}{10}$

$a_{1}=0.083\ m/s^2$

Similarly,

$F_{2}=ma_{2}$

For total force,

$F_{3}=F_{2}+F_{1}$

$ma_{3}=ma_{2}+ma_{1}$

The speed of second tugboat is

$v=\dfrac{11\times10^{3}}{3600}$

$v=3.05\ m/s$

We need to calculate total acceleration

$a_{3}=\dfrac{v}{t}$

$a_{3}=\dfrac{3.05}{10}$

$a_{3}=0.305\ m/s^2$

We need to calculate the acceleration a₂

$0.305=a_{2}+0.083$

$a_{2}=0.305-0.083$

$a_{2}=0.222\ m/s^2$

We need to calculate the factor of F₁ and F₂

Dividing force F₁ by F₂

$\dfrac{F_{1}}{F_{2}}=\dfrac{m\times0.83}{m\times0.22}$

$\dfrac{F_{1}}{F_{2}}=3.7$

$F_{1}=3.7F_{2}$

Hence, The magnitude of F₁ is 3.7 times of F₂

Answer from: Quest

bacteria that live on the ocean floor are sustained by phytoplankton. phytoplankton, microscopic marine photosynthetic organisms, have a vastly significant role to play not only in the marine food web of which they’re part of, but also on a more global scale. despite their infinitely small size in comparison to other marine organisms, these tiny creatures occupy an immensely important ecological niche: they are the foundation of the marine food web, and as primary producers, play key roles in supporting all other organisms in the marine environment, as well as in the regulation of the earth’s climate through the sequestration of carbon, oxygen production, and other related processes. phytoplankton account for roughly half of all global primary productivity; therefore, their significance extends far beyond the marine environment alone. there is an intriguing sense of irony in the realization that these tiny living beings that often live out their existence unnoticed and undetected by the rest of the world, have such a far-reaching impact on the lives of virtually all other living organisms on the planet, particularly on those in the marine environment. the world that we have become accustomed to has been and is continuously shaped by the workings of these miniscule yet vital “plants of the sea”.

hope this !

Answer from: Quest

The magnets are probably damaged or there not strong enough to attached to the refrigerator

Another question on Physics

Physics, 21.06.2019 19:30

11. you want to calculate the displacement of an object thrown over a bridge. using -10 m/s2 for acceleration due to gravity, what would be the total displacement of the object if it took 8 seconds before hitting the water?

Answers: 1

Answer

Physics, 22.06.2019 02:50

Steam is generated in a boiler of a cogeneration plant at 10 mpa and 450°c at a steady rate of 5 kg/s. in normal operation, steam expands in a turbine to a pressure of 0.5 mpa and is then routed to the process heater, where it supplies the process heat. steam leaves the process heater as a saturated liquid and is pumped to the boiler pressure. in this mode, no steam passes through a condenser, which operates at 20 kpa. (a) determine the power produced in the turbine and the rate at which process heat is supplied in this mode. (b) determine the power produced in the turbine and the rate of process heat supplied if only 60 percent of the steam is routed to the process heater and the remainder is expanded to the condenser pressure. (3.32 mw; 9.69 mw; 4.25 mw; 5.82 mw)

Answers: 3

Answer

Physics, 22.06.2019 03:00

Isla’s change in velocity is 30 m/s, and hazel has the same change in velocity. which best explains why they would have different accelerations? isla had negative acceleration, and hazel had positive. isla had a different time than hazel. isla had positive acceleration, and hazel had negative. isla went a farther distance than hazel.

Answers: 1

Answer

Physics, 22.06.2019 11:00

What is the measurement of how fast an object moves relative to a reference point?

Answers: 1

Answer

You know the right answer?

A tugboat tows a ship with a constant force of magnitude F1. The increase in the ship's speed during...

Questions