subject
Physics, 04.03.2020 02:52 mpzpowell7506

. Add the following three force vectors, indicating your results by filling in the blanks for the x and y components for each, and expressing the resultant (the sum) in both rectangular and polar forms. Then write down the equilibrant for these two force vectors. Show your work here. These forces and angles are used in the lab report as well so keep a copy of your work.
Fi-4.50 N 0
F: 2.50 N @40°-
F 3.00 N a 135°-
R=F1 + F2 + F3 = X + X + .
Magnitude of R Angle w/r to +x direction
Equilibrant--R X +

ansver
Answers: 2

Another question on Physics

question
Physics, 22.06.2019 01:30
What is the magnitude of the resultant vector round your answer to the nearest tenth
Answers: 2
question
Physics, 22.06.2019 06:20
Clothing made of several thin layers of fabric with trapped air in between, often called ski clothing, is commonly used in cold climates because it is light, fashionable, and a very effective thermal insulator. so it is no surprise that such clothing has largely replaced thickand heavy old-fashioned coats. (a) consider a jacket made of five layers of 0.1-mm-thick synthetic fabric (k = 0.13 w/m·°c) with 1.5-mm-thick air space (k = 0.026 w/m·°c) between the layers. assuming the inner surface temperature of the jacket to be 28°c and the surface area to be 1.25 m2, determine the rate of heat loss through the jacket when the temperature of the outdoors is 0°c and the heat transfer coefficient at the outer surface is 25 w/m2·°c. (b) what would your response be if the jacket is made of a single layer of 0.5-mm-thick synthetic fabric? what should be the thickness of a wool fabric (k = 0.035 w/m·°c) if the person is to achieve the same level of thermal comfort wearing a thick wool coat instead of a five-layer ski jacket?
Answers: 1
question
Physics, 22.06.2019 16:00
Rank the six combinations of electric charges on the basis of the electric force acting on q1. define forces pointing to the right as positive and forces pointing to the left as negative. rank positive forces as larger than negative forces. q1,q2,q3 = positive(+) q1 = + q2 = + q3 = - q1 = + q2= - q3= + q1= - q2= + q3= + q1= + q2= - q3= - q1,q2,q3 = negative
Answers: 1
question
Physics, 22.06.2019 20:50
Asquare 1m x 1m plate is shown below. all four of its edges are kept at 0 co. at t=0the temperature distribution is given by: y xtsins n75)=.a) using separation of variables determine the temperature distribution t(x,y,t)along the plate at any time t.b) discretize the heat conduction equation +=22222 txtusing a second-order centered difference scheme for the two second derivatives and a first-order forward euler scheme for the first derivative. using von neumann stability analysis, determine the stability criterion for the proposed discretization scheme in terms of , hand t. solve for the maximum allowable time step tmax
Answers: 1
You know the right answer?
. Add the following three force vectors, indicating your results by filling in the blanks for the x...
Questions
question
English, 19.08.2019 18:30
question
Mathematics, 19.08.2019 18:30
question
Social Studies, 19.08.2019 18:30
Questions on the website: 13722360