Physics, 27.02.2020 20:15 babyduckies37

A 44-cm-diameter water tank is filled with 35 cm of water. A 3.0-mm-diameter spigot at the very bottom of the tank is opened and water begins to flow out. The water falls into a 2.0-cm-diameter, 40-cm-tall glass cylinder. As the water falls and creates noise, resonance causes the column of air in the cylinder to produce a tone at the column's fundamental frequency. What are:

a. the frequency
b. the rate at which the frequency is changing (Hz/s) when the cylinder has been filling for 4.0 s? You can assume that the height of the water in the tank does not appreciably change in 4.0 s.

Answers: 1

Show answers

Answers

Answer from: ste78

The frequency = 521.59 Hz

The rate at which the frequency is changing = 186.9 Hz/s

Explanation:

Given that :

Diameter of the tank = 44 cm

Radius of the tank = $\frac{d}{2}$ = $\frac{44}{2}$ = 22 cm

Diameter of the spigot = 3.0 mm

Radius of the spigot = $\frac{d}{2}$ = $\frac{3.0}{2}$ = 1.5 mm

Diameter of the cylinder = 2.0 cm

Radius of the cylinder = $\frac{d}{2}$ = $\frac{2.0}{2}$ = 1.0 cm

Height of the cylinder = 40 cm = 0.40 m

The height of the water in the tank from the spigot = 35 cm = 0.35 m

Velocity at the top of the tank = 0 m/s

From the question given, we need to consider that the question talks about movement of fluid through an open-closed pipe; as such it obeys Bernoulli's Equation and the constant discharge condition.

The expression for Bernoulli's Equation is as follows:

$P_1+\frac{1}{2}pv_1^2+pgy_1=P_2+\frac{1}{2}pv^2_2+pgy_2$

$pgy_1=\frac{1}{2}pv^2_2 +pgy_2$

$v_2=\sqrt{2g(y_1-y_2)}$

where;

P₁ and P₂ = initial and final pressure.

v₁ and v₂ = initial and final fluid velocity

y₁ and y₂ = initial and final height

p = density

g = acceleration due to gravity

So, from our given parameters; let's replace

v₁ = 0 m/s ; y₁ = 0.35 m ; y₂ = 0 m ; g = 9.8 m/s²

∴ we have:

v₂ = $\sqrt{2*9.8*(0.35-0)}$

v₂ = $\sqrt {6.86}$

v₂ = 2.61916

v₂ ≅ 2.62 m/s

Similarly, using the expression of the continuity for water flowing through the spigot into the cylinder; we have:

v₂A₂ = v₃A₃

v₂r₂² = v₃r₃²

where;

v₂r₂ = velocity of the fluid and radius at the spigot

v₃r₃ = velocity of the fluid and radius at the cylinder

$v_3 = \frac{v_2r_2^2}{v_3^2}$

where;

v₂ = 2.62 m/s

r₂ = 1.5 mm

r₃ = 1.0 cm

we have;

v₃ = (2.62 m/s)* $(\frac{1.5mm^2}{1.0mm^2} )$

v₃ = 0.0589 m/s

∴ velocity of the fluid in the cylinder = 0.0589 m/s

So, in an open-closed system we are dealing with; the frequency can be calculated by using the expression;

$f=\frac{v_s}{4(h-v_3t)}$

where;

v_s = velocity of sound

h = height of the fluid

v₃ = velocity of the fluid in the cylinder

$f=\frac{343}{4(0.40-(0.0589)(0.4)}$

$f= \frac{343}{0.6576}$

= 521.59 Hz

∴ The frequency = 521.59 Hz

What are the rate at which the frequency is changing (Hz/s) when the cylinder has been filling for 4.0 s?

The rate at which the frequency is changing is related to the function of time (t) and as such:

$\frac{df}{dt}= \frac{d}{dt}(\frac{v_s}{4}(h-v_3t)^{-1})$

$\frac{df}{dt}= -\frac{v_s}{4}(h-v_3t)^2(-v_3)$

$\frac{df}{dt}= \frac{v_sv_3}{4(h-v_3t)^2}$

where;

v_s (velocity of sound) = 343 m/s

v₃ (velocity of the fluid in the cylinder) = 0.0589 m/s

h (height of the cylinder) = 0.40 m

t (time) = 4.0 s

Substituting our values; we have ;

$\frac{df}{dt}= \frac{343*0.0589}{4(0.4-(0.0589*4.0))^2}$

= 186.873

≅ 186.9 Hz/s

∴ The rate at which the frequency is changing = 186.9 Hz/s when the cylinder has been filling for 4.0 s.

Answer from: Quest

pe = weightxheight = 2000x1000=2,000,000joules

Answer from: Quest

i think the answer is a and b

i wish you luck

Another question on Physics

Physics, 21.06.2019 17:00

Asimply means that over time there was some sort of change.

Answers: 1

Answer

Physics, 22.06.2019 01:30

Kate is working on a project in her tech education class. she plans to assemble a fan motor. which form of energy does the motor convert most of its electric energy into? a. light energy b. motion energy c. sound energy d. thermal energy

Answers: 1

Answer

Physics, 22.06.2019 04:50

Unpolarized light whose intensity is 1.19 w/ is incident on a polarizer. (a) what is the intensity of the light leaving the polarizer? (b) if the analyzer is set at an angle of = 41.0∘ with respect to the polarizer, what is the intensity of the light that reaches the photocell?

Answers: 1

Answer

Physics, 22.06.2019 05:30

If gases like carbon dioxide and methane make up less than 1% of the total atmosphere, why is it important for scientists to monitor changes in percentages of these gases?

Answers: 1

Answer

You know the right answer?

A 44-cm-diameter water tank is filled with 35 cm of water. A 3.0-mm-diameter spigot at the very bott...

Questions