subject
Physics, 26.02.2020 17:53 loll9416

Water is leaking out of an inverted conical tank at a rate of 1.5 cm3 /min at the same time that water is being pumped into the tank at a constant rate. The tank has height 10 cm and the diameter at the top is 6 cm. If the water level is rising at a rate of 1.0 cm/min when the height of the water is 2 cm, find the rate at which water is being pumped into the tank. (a) Draw a picture of the situation for any time t. (b) What quantities are given in the problem

ansver
Answers: 1

Another question on Physics

question
Physics, 21.06.2019 21:40
This problem has been solved! see the answera non-uniform fire escape ladder is 6.0m long whenextended to the icy alley below. it is held at the top by africtionless pivot, and there is neglibible frictional force fromthe icy surface at the bottom. the ladder weighs 250n, and it'scenter of gravity is 2.0m along the ladder from the bottom. amother and child of total weight 750n are on the ladder 1.5m fromthe pivot. the ladder makes an angle θ with the horizontal.find the magnitude and direction ofa) the force exerted by the icy alley on the ladderb) the force exerted by the ladder on the pivotc) do your answers in part a and b depend on the angle?
Answers: 3
question
Physics, 21.06.2019 22:00
Atank holds 1000 gallons of water, which drains from the bottom of the tank in half an hour. the values in the table show the volume v of water remaining in the tank (in gallons) after t minutes.t(min) 5 10 15 20 25 30v(gal) 694 444 250 111 28 0(a) if p is the point (15, 250) on the graph of v, find the slopes of the secant lines pq when q is the point on the graph with t = 5, 10, 20, 25, and 30.(b) estimate the slope of the tangent line at p by averaging the slopes of two secant lines.(c) use a graph of the function to estimate the slope of the tangent line at p. (this slope represents the rate at which the water is flowing from the tank after 15 minutes.)show all steps.
Answers: 2
question
Physics, 21.06.2019 23:10
6–55 refrigerant-134a enters the condenser of a residential heat pump at 800 kpa and 358c at a rate of 0.018 kg/s and leaves at 800 kpa as a saturated liquid. if the compressor consumes 1.2 kw of power, determine (a) the cop of the heat pump and (b) the rate of heat absorption from the outside air.
Answers: 2
question
Physics, 22.06.2019 11:10
Assume this car is driven off a cliff . how many arrows of force need to be drawn in the free body diagram? assume no air resistance -five -one -three -four
Answers: 1
You know the right answer?
Water is leaking out of an inverted conical tank at a rate of 1.5 cm3 /min at the same time that wat...
Questions
question
Biology, 07.07.2019 06:30
Questions on the website: 13722367