subject
Physics, 24.02.2020 16:07 Softball6286

Q1 Abba stands on a scale in an elevator. At rest on the ground floor it reads (224 lbs = 1000 N). At some later time, the elevator has a velocity upward of 5 m/s and acceleration downward of 2 m/s2. What does the scale read?

ansver
Answers: 1

Another question on Physics

question
Physics, 22.06.2019 02:00
The crank oa rotates in the vertical plane with a constant clockwise angular velocity ω0 of 5.6 rad/s. for the position where oa is horizontal, calculate the force under the light roller b of the 10.6-kg slender bar ab.
Answers: 2
question
Physics, 22.06.2019 06:10
Drag each tile to the correct box. tiles bra i sequence
Answers: 2
question
Physics, 22.06.2019 06:20
Clothing made of several thin layers of fabric with trapped air in between, often called ski clothing, is commonly used in cold climates because it is light, fashionable, and a very effective thermal insulator. so it is no surprise that such clothing has largely replaced thickand heavy old-fashioned coats. (a) consider a jacket made of five layers of 0.1-mm-thick synthetic fabric (k = 0.13 w/m·°c) with 1.5-mm-thick air space (k = 0.026 w/m·°c) between the layers. assuming the inner surface temperature of the jacket to be 28°c and the surface area to be 1.25 m2, determine the rate of heat loss through the jacket when the temperature of the outdoors is 0°c and the heat transfer coefficient at the outer surface is 25 w/m2·°c. (b) what would your response be if the jacket is made of a single layer of 0.5-mm-thick synthetic fabric? what should be the thickness of a wool fabric (k = 0.035 w/m·°c) if the person is to achieve the same level of thermal comfort wearing a thick wool coat instead of a five-layer ski jacket?
Answers: 1
question
Physics, 22.06.2019 08:20
A3030 cmcm wrench is used to loosen a bolt with a force applied 0.30.3 mm from the bolt. it takes 6060 nn to loosen the bolt when the force is applied perpendicular to the wrench. how much force would it take if the force was applied at a 3030 degree angle from perpendicular? a 3030 cmcm wrench is used to loosen a bolt with a force applied 0.30.3 mm from the bolt. it takes 6060 nn to loosen the bolt when the force is applied perpendicular to the wrench. how much force would it take if the force was applied at a 3030 degree angle from perpendicular?
Answers: 3
You know the right answer?
Q1 Abba stands on a scale in an elevator. At rest on the ground floor it reads (224 lbs = 1000 N). A...
Questions
question
Mathematics, 27.02.2021 01:00
question
Social Studies, 27.02.2021 01:00
question
Computers and Technology, 27.02.2021 01:00
question
Mathematics, 27.02.2021 01:00
Questions on the website: 13722360