Would electromagnetic waves exist if changing magnetic fields could produce electric fields but changing electric fields could not, in turn, produce magnetic fields? Explain.

No electromagnetic waves can not exists if changing magnetic field could produce electric fields but the changing electric fields could not produce magnetic fields. Electromagnetic waves are oscillating waves and they are based on this fact that the changing magnetic field produce electric field and the changing electric field produce the magnetic field. That is why these waves are known for self propagation and can even travel through vacuum. In this wave the electric field and the magnetic field lies perpendicular to each other. These waves travel with the speed of light and their example is light and other radiations coming from sun.

most voltage drop calculators want the distance between the source and destination. then internally, they double it so both the source and return wires are calculated. but you need to know which distance the calculator uses so you're not half of what you should be or double what you should be.

most circuit breakers will not take a #6 directly, so the electrician will have to splice on a smaller pigtail. you also have to upsize the grounding wire when you upsized the ungrounded (hot) wire (see note in 250.122). this will preclude using most cable assemblies, as a cable with #6 copper will most likely only have a #10 grounding conductor. you need a #6 grounding conductor if the circuit is 20a. a #8 cable is no better, as it will have a #10 grounding conductor too. but most 20a breakers will take a #8 directly.

in your related post, you didn't say what type of load this is. if it is a light or heater, voltage drop won't be a big issue. if this is a motor, the current needs are huge at startup and the voltage drop can pose a problem. if this is a motor, knowing if the motor is under much load during startup will answer the voltage drop effect (a saw is easier to start than a compressor).

what was the answer?