A guy named Joe, who is 1.6 meters tall, enters a room in which someone has placed a large convex mirror with radius of curvature R equal to 30 meters. The mirror has been cut in half, so that the axis of the mirror is at ground level. As Joe enters the room, he is 5 meters in front of the mirror, but he is looking the other way, so he fails to see it. When he turns around, he is startled by his own image in the mirror.
Part A: How far away does the image appear to Joe?
Express your answer in meters, to three significant figures or as a fraction.
Part B: What is the image height yim that Joe sees in the mirror?
Express your answer in meters, to three significant figures or as a fraction.

Part C: Now what is the length (i. e., the distance from head to toe) of Joe's image?
Express your answer in meters, to three significant figures or as a fraction.

In a wind tunnel the speed changes as the cross sectional area of the tunnel changes. if the speed in a 6' x 6' square test section is 100 mph, what was the speed upstream of the test section where the tunnel measured 20' x 20'? use conservation of mass and assume incompressible flow. conservation of mass requires that as the flow moves through a path or a duct the product of the density, velocity and cross sectional area must remain constant; i.e., that ova-constant. a model is being tested in a wind tunnel at a speed of 100 mph if the flow in the test section is at sea level standard conditions, what is the pressure at the model's stagnation point? (a) the tunnel speed is being measured by a pitot-static tube connected to a u- tube manometer. what is the reading on that manometer in inches of water? (b) at one point on the model a pressure of 2058 psf is measured. what is the local airspeed at that point?

Steam is generated in a boiler of a cogeneration plant at 10 mpa and 450°c at a steady rate of 5 kg/s. in normal operation, steam expands in a turbine to a pressure of 0.5 mpa and is then routed to the process heater, where it supplies the process heat. steam leaves the process heater as a saturated liquid and is pumped to the boiler pressure. in this mode, no steam passes through a condenser, which operates at 20 kpa. (a) determine the power produced in the turbine and the rate at which process heat is supplied in this mode. (b) determine the power produced in the turbine and the rate of process heat supplied if only 60 percent of the steam is routed to the process heater and the remainder is expanded to the condenser pressure. (3.32 mw; 9.69 mw; 4.25 mw; 5.82 mw)

Place me with this question is my last question