Water enters a baseboard radiator at 180 °F and at a flow rate of 2.0 gpm. Assuming the radiator releases heat into the room at a rate of 20,000 Btu/ hr., what is the temperature of the water leaving the radiator?

If you want to change the pitch of a sound, you have to change the

In a wind tunnel the speed changes as the cross sectional area of the tunnel changes. if the speed in a 6' x 6' square test section is 100 mph, what was the speed upstream of the test section where the tunnel measured 20' x 20'? use conservation of mass and assume incompressible flow. conservation of mass requires that as the flow moves through a path or a duct the product of the density, velocity and cross sectional area must remain constant; i.e., that ova-constant. a model is being tested in a wind tunnel at a speed of 100 mph if the flow in the test section is at sea level standard conditions, what is the pressure at the model's stagnation point? (a) the tunnel speed is being measured by a pitot-static tube connected to a u- tube manometer. what is the reading on that manometer in inches of water? (b) at one point on the model a pressure of 2058 psf is measured. what is the local airspeed at that point?

Determine el momento angular de un rueda de 3000g moviendose a 10m/s con un radio de giro de 400cm