Physics, 11.01.2020 00:31 spinshot13

What does the plum pudding model of the atom state?

Answers: 2

Show answers

Another question on Physics

Physics, 21.06.2019 14:10

Amachinist needs to remove a tight fitting pin of material a from a hole in a block made of material b. the machinist heats both the pin and the block to the same high temperature and removes the pin easily. what statement relates the coefficient of thermal expansion of material a to that of material b? a) the situation is not possible, heating block b will shrink the hole in the material as the material expands with increasing temperatureb) material b has the same coefficient of expansion as does material ac) material b has a negative coefficient of expansion and a has a positive coefficient of expansiond) material a has a greater coefficient of expansion than does material be) material b has a greate

Answers: 1

Answer

Physics, 21.06.2019 15:10

Alightning strike consists of charge moving from a cloud to the ground . in one particular case, the electrons in a lightning strike are confined to travel within a radius of 1.5 m and to move at a speed of 5.0 x 10 m/s. if the density of electrons in the strike is 10'15 electrons/m what current is carried by the lightning ?

Answers: 1

Answer

Physics, 22.06.2019 03:00

Which boundary is associated with the building of the himalaya mountains? convergent transform divergent hot spot

Answers: 1

Answer

Physics, 22.06.2019 03:10

Athin plate moves between two parallel, horizontal, stationary flat surfaces at a constant velocity of v = 7.5 m/s. the two stationary surfaces are spaced 4 cm apart, and the medium between them is filled with oil whose viscosity is 0.9 n·s/m2. the part of the plate immersed in oil at any given time is 2 m long and 0.5 m wide. if the plate moves through the mid-plane between the surfaces, determine the force required to maintain this motion. what would your response be if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top surface (h1)? if the plate moves through the mid-plane between the surfaces, the force required to maintain the motion will be n. if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top (h1) surface, the force required to maintain the motion would be n.