The ratio of the inductive reactance to the
capacitivereactance is observed to be 5.36 in a series rcl circuit.
theresonant frequency of the circuit is 225 hz. what is the
frequency(nonresonant) of the generator that is connected to
thecircuit?

The non resonance frequency of the generator is = 1201.79 Hz

Explanation:

At resonance,

f₀ = 1/2π√LC Equation 1

Where f₀ = resonance frequency, L = inductance, C = capacitance

making LC the subject of the equation

LC = 1/4πf₀² Equation 2

Given: f₀ = 225 Hz, and π = 3.143

Substituting these values into equation 2,

LC = 1/(4×3.143²×225²)

LC = 1/2000385.9

LC = 5×10⁻⁷

If the ratio of capacitive reactance to inductive reactance = 5.36

1/2πfC/2πfL = 5.36

1/4π²f²LC = 5.36

Where f = frequency of the non resonant

making f the subject of the equation

f = 5.36/2π√LC Equation 3

Substituting the value of LC = 5×10⁻⁷ into equation 3

f = 5.36/2×3.143√(5×10⁻⁷)

f = 5.36/(6.286×0.00071)

f = 5.36/0.00446

f = 1201.79 Hz

Thus the non resonant frequency of the generator is = 1201.79 Hz

be subject to a force andchange its motion

the design of a ski jumping suit involves a trade-off between giving the skiers lift to get higher jumps and ensuring the skier does not face a lot of drag before the jump itself. an expansive suit may to lift the skier higher, but at the same time, it will also increase the air resistance. higher air resistance as the skier goes down the slope limits the speed of the jump. a big suit also increases the risk of losing balance or control, especially if there's a strong gust of wind. while technologically enhanced suits a lot, clothing is not the only factor in a ski jumper’s success. gathering speed while skiing down the slope, ensuring good speed on the ramp, and maintaining good body posture and form in the air all contribute to a ski jumper's success.