Awave with a period of three seconds travels at a speed of 12 m/s what is the wavelength of the wave

λ = 0.28m

Explanation:

Equation used is v = λf, where v is velocity, λ is wavelength, and f is frequency

We need to find wavelength so rearrange the equation in term of wavelength.

v = λf

λ = f/v

We know that period is the inverse of frequency (f = 1/T), so lets substitute that into our equation

λ = f/v

λ = (1/T)/v

Plug in your the given values given in the question.

We're given v=12m/s and T=3sec

λ = (1/T)/v

λ = (1/3)/12

λ = 1/36 = 0.2777777 = 0.28m

most voltage drop calculators want the distance between the source and destination. then internally, they double it so both the source and return wires are calculated. but you need to know which distance the calculator uses so you're not half of what you should be or double what you should be.

most circuit breakers will not take a #6 directly, so the electrician will have to splice on a smaller pigtail. you also have to upsize the grounding wire when you upsized the ungrounded (hot) wire (see note in 250.122). this will preclude using most cable assemblies, as a cable with #6 copper will most likely only have a #10 grounding conductor. you need a #6 grounding conductor if the circuit is 20a. a #8 cable is no better, as it will have a #10 grounding conductor too. but most 20a breakers will take a #8 directly.

in your related post, you didn't say what type of load this is. if it is a light or heater, voltage drop won't be a big issue. if this is a motor, the current needs are huge at startup and the voltage drop can pose a problem. if this is a motor, knowing if the motor is under much load during startup will answer the voltage drop effect (a saw is easier to start than a compressor).

electromagnetic shielding is the practice of reducing the electromagnetic field in a space by blocking the field with barriers made of conductive or magnetic materials. shielding is typically applied to enclosures to isolate electrical devices from their surroundings, and to cables to isolate wires from the environment through which the cable runs. electromagnetic shielding that blocks radio frequency electromagnetic radiation is also known as rf shielding.

the shielding can reduce the coupling of radio waves, electromagnetic fields and electrostatic fields. a conductive enclosure used to block electrostatic fields is also known as a faraday cage. the amount of reduction depends very much upon the material used, its thickness, the size of the shielded volume and the frequency of the fields of interest and the size, shape and orientation of apertures in a shield to an incident electromagnetic

from wikipedia