subject
Physics, 28.12.2019 01:31 tony7135

An installation consists of a 10-kva, single-phase transformer with a 440-volt primary and a 110-volt, 2-wire secondary using insulation type thwn copper conductors. no secondary ocpd is installed. the secondary loads are considered to be noncontinuous loads. calculate the minimum size secondary conductors required to handle the secondary full load current for this transformer.

ansver
Answers: 2

Another question on Physics

question
Physics, 22.06.2019 07:30
Boxing gloves are padded to lessen the force of a blow. (a) calculate the force exerted by a boxing glove on an opponent’s face, if the glove and face compress 7.50 cm during a blow in which the 7.00-kg arm and glove are brought to rest from an initial speed of 10.0 m/s. (b) calculate the force exerted by an identical blow in the gory old days when no gloves were used and the knuckles and face would compress only 2.00 cm. (c) discuss the magnitude of the force with glove on. does it seem high enough to cause damage even though it is lower than the force with no glove?
Answers: 1
question
Physics, 22.06.2019 10:00
Which atomic model was proposed as a result of j. j. thomson’s work?
Answers: 1
question
Physics, 22.06.2019 13:10
Most short-period comets do not have randomly oriented orbits because
Answers: 2
question
Physics, 22.06.2019 16:00
Suppose a soccer ball is kicked from the ground at an angle 20.0º above the horizontal at 8.00 m/s. the y-velocity is determined to be 2.74 m/s. how long will the ball be in the air? assume the ball lands at the same height at which it was kicked.
Answers: 2
You know the right answer?
An installation consists of a 10-kva, single-phase transformer with a 440-volt primary and a 110-vol...
Questions
question
History, 21.07.2019 10:00
Questions on the website: 13722367