subject
Physics, 21.12.2019 02:31 aidene0311

Asmall cube of lithium (density = 0.535 g/cm3) measuring 1.0 mm on each edge is added to 0.550 l of water. the following reaction occurs: 2li(s)+2h2o(l)→2lioh(aq)+h2(g) part a what is the freezing point of the resulting solution? assume full dissociation of strong electrolytes and negligible solubility of hydrogen gas in water. the molal freezing-point-depression constant for water is 1.86°c/m.

ansver
Answers: 3

Another question on Physics

question
Physics, 21.06.2019 21:30
Write the equation for momentum, first using symbols for the variables, then using words for the variables.
Answers: 2
question
Physics, 22.06.2019 03:10
Athin plate moves between two parallel, horizontal, stationary flat surfaces at a constant velocity of v = 7.5 m/s. the two stationary surfaces are spaced 4 cm apart, and the medium between them is filled with oil whose viscosity is 0.9 n·s/m2. the part of the plate immersed in oil at any given time is 2 m long and 0.5 m wide. if the plate moves through the mid-plane between the surfaces, determine the force required to maintain this motion. what would your response be if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top surface (h1)? if the plate moves through the mid-plane between the surfaces, the force required to maintain the motion will be n. if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top (h1) surface, the force required to maintain the motion would be n.
Answers: 2
question
Physics, 22.06.2019 07:00
Which articulations allow for greatest range of motion?
Answers: 1
question
Physics, 22.06.2019 07:30
Some material consisting of a collection of microscopic objects is kept at a high temperature. a photon detector capable of detecting photon energies from infrared through ultraviolet observes photons emitted with energies of 0.3 ev, 0.5 ev, 0.8 ev, 2.0ev, 2.5ev, and 2.8ev. these are the only photon energies observed. (a) draw and label a possible energy-level diagram for one of the microscopic objects, which has four bound states. on the diagram, indicate the transitions corresponding to the emitted photons. explain briefly. (b) would a spring–mass model be a good model for these microscopic objects? why or why not? (c) the material is now cooled down to a very low temperature, and the photon detector stops detecting photon emissions. next, a beam of light with a continuous range of energies from infrared through ultraviolet shines on the material, and the photon detector observes the beam of light after it passes through the material. what photon energies in this beam of light are observed to be significantly reduced in intensity (“dark absorption lines”)? explain briefly.
Answers: 3
You know the right answer?
Asmall cube of lithium (density = 0.535 g/cm3) measuring 1.0 mm on each edge is added to 0.550 l of...
Questions
question
Physics, 21.07.2019 15:10
Questions on the website: 13722363