subject
Physics, 06.12.2019 23:31 destinywiggins75

one type of gas mixture used in anesthesiology is a 50%/50% mixture (by volume) of nitrous oxide (n2o) and oxygen (o2), which can be premixed and kept in a cylinder for later use. because these two gases don't react chemically at or below 2000 psi, at typical room temperatures they form a homogeneous single gas phase, which can be considered an ideal gas. if the temperature drops below -6∘c, however, n2o may begin to condense out of the gas phase. then any gas removed from the cylinder will initially be nearly pure o2; as the cylinder empties, the proportion of o2 will decrease until the gas coming from the cylinder is nearly pure n2o. in a test of the effects of low temperatures on the gas mixture, a cylinder filled at 25.0 ∘c to 2000 psi (gauge pressure) is cooled slowly and the pressure is monitored.

part a)

what is the expected pressure at -5.00∘c if the gas remains a homogeneous mixture?

what is the expected pressure at -5.00 if the gas remains a homogeneous mixture?

ansver
Answers: 3

Another question on Physics

question
Physics, 22.06.2019 09:30
An electric clothes dryer has a resistance of 8 ohms. it draws 30 a of current. what is the voltage, in volts, of the wall outlet that it is plugged into?
Answers: 2
question
Physics, 22.06.2019 13:40
An ideal otto cycle has a compression ratio of 10.5, takes in air at 90 kpa and 40°c, and is repeated 2500 times per minute. using constant specific heats at room temperature, determine the thermal efficiency of this cycle and the rate of heat input if the cycle is to produce 90 kw of power.
Answers: 2
question
Physics, 22.06.2019 17:30
When using the scientist method, which step comes last?
Answers: 1
question
Physics, 23.06.2019 00:00
You are a researcher for a golf club manufacturer. you are given two identical looking cubes of a metal alloy. you are informed that they are made of the exact same material, but one is crystalline, whereas the other is amorphous. it is your job to determine which one is amorphous this one is more stress-resistant and is useful in reinforcing golf clubs. which of the following is the best way to determine which is which? a. determine the density of each cube. the more dense one is the amorphous solid. b. melt both cubes and look for a broader range of melting temperatures. the one that melts over a broader range of temperatures is the amorphous solid. c. determine the density of each cube. the less dense cube is the amorphous solid. d. melt both cubes and measure the range of melting temperatures. the one that melts over a narrower range of temperatures is the amorphous solid.
Answers: 1
You know the right answer?
one type of gas mixture used in anesthesiology is a 50%/50% mixture (by volume) of nitrous oxide (n2...
Questions
question
Physics, 16.10.2019 03:00
question
Mathematics, 16.10.2019 03:00
Questions on the website: 13722367