You are running a triaxial test on a soil sample. you set the confining pressure to 40 psi. you apply a 40 psi load to the sample. calculate the friction angle and the angle of the failure plane. assume cohesion is zero. you must plot your mohr’s circle as part of the answer.

Acave rescue team lifts an injured spelunker directly upward and out of a sinkhole by means of a motor-driven cable. the lift is performed in three stages, each requiring a vertical distance of 11.0 m: (a) the initially stationary spelunker is accelerated to a speed of 4.80 m/s; (b) he is then lifted at the constant speed of 4.80 m/s; (c) finally he is decelerated to zero speed. how much work is done on the 78.0 kg rescue by the force lifting him during each stage

Apropagating wave in space with electric and magnetic components. these components oscillate at right angles to each other. it may travel in a vacuum. determine the term.

3. a worker pushes a 30.5 kg polished stone along a polished table with a force on bonin a straight line for 5.20 s after starting from rest. there is no friction between thestone and the table. at the end of the table. the stone is hooked to a cable with a lengthof 62.0 cm to rotate it to a rough table to store until they can be picked up. the roughtable has a coefficient of static friction 0.702 with the polished stone. remember that 8= 9.80 m/s2a) what is the speed of the stone when it is hooked to the cable? b) what is the tension in the cable while the stone is rotating? (there is still nofriction)c) how much force is needed to make the stone begin sliding from rest on therough table? ius = 0.70262.0 cm30.5 kg20.5 kg6= 0