Physics, 26.11.2019 05:31 glocurlsprinces

Awheel with a weight of 395 n comes off a moving truck and rolls without slipping along a highway. at the bottom of a hill it is rotating at an angular velocity of 23.1 rad/s . the radius of the wheel is 0.652 m and its moment of inertia about its rotation axis is 0.800 mr2. friction does work on the wheel as it rolls up the hill to a stop, at a height of h above the bottom of the hill; this work has a magnitude of 3470 j .

Answers: 2

Show answers

Answers

Answer from: jaredsmailandst

h=12.04m

Explanation:

1) Notation and some important concepts

$\omega_i$ represent the initial angular velocity

v_i represent the initial velocity

represent the final height reached by the mass

represent the mass of the object

W_f represent the work due the friction force (variable of interest)

$KE_{rot}$ represent the rotational energy

$KE_{tra}$ represent the transitional kinetic energy

PE=mgh represent the potential energy

I=0.8MR^2 represent the rotational inertia

W= 395 N is the weight of the object

For this problem we can use the principle of energy conservation, this principle states that "the total energy of an isolated system remains constant; it is said to be conserved over time".

At the begin the wheel had rotational energy defined as "The kinetic energy due to rotational motion. Is a scalar quantity and have units of energy usually Joules". And this energy is represented by the following formula: $KE_{rot}=\frac{1}{2}I\omega^2_i$

At the starting point the wheel also had kinetic energy defined as "The energy of mass in motion" and is given by the formula : $KE_{tran}=\frac{1}{2}mv_i^2_i$

At the end of the movement we have potential energy since the mass is at height h the potential energy is defined as "The energy stored within an object, due to the object's position, arrangement or state" and is given by the formula PE=mgh .

Since we have friction acting we have a work related to the force of friction and we need to subtract this from the formula of conservation of energy

2) Formulas to use

The figure attached is an schematic draw for the problem

Using the principle of energy conservation we have:

$KE_{rot}+KE_{tran}-W_f =PE$

Replacing the formulas for each energy w ehave:

$\frac{1}{2}I\omega^2_i+\frac{1}{2}mv_i^2_i-W_f =Mgh$ (1)

We also know that $v_i =\omega_i R$ and I=0.8MR^2 so if we replace this into equation (1) we got:

$0.8(\frac{1}{2})M(R\omega_i)^2 +\frac{1}{2}M(\omega_i R)^2-W_f=Mgh$ (2)

We also know that the weight is defined as W=mg so then $M=\frac{W}{g}$ , so if we replace this into equation (2) we have:

$0.8(\frac{1}{2})\frac{W}{g}(R\omega_i)^2 +\frac{1}{2}\frac{W}{g}(\omega_i R)^2-W_f=Wh$ (3)

So then if we solve for h we got:

$h=\frac{0.8(\frac{1}{2})\frac{W}{g}(R\omega_i)^2 +\frac{1}{2}\frac{W}{g}(\omega_i R)^2-W_f}{W}$ (4)

3) Solution for the problem

Now we can replace the values given into equation (4):

$h=\frac{0.8(\frac{1}{2})\frac{395N}{9.8\frac{m}{s^2}}(0.652m(23.1\frac{rad}{s}))^2 +\frac{1}{2}\frac{395}{9.8\frac{m}{s^2}}(23.1\frac{rad}{s}(0.652m))^2-3470J}{395N}=12.04m$ (4)

So then our final answer would be h=12.04m

Awheel with a weight of 395 n comes off a moving truck and rolls without slipping along a highway. a

Answer from: Quest

magnified images possible images can be real = projected onto a screen

Answer from: Quest

i believe the answer would be:

d. violin, clarinet, french horn, and tuba

Another question on Physics

Physics, 21.06.2019 15:00

How much work would be needed to raise the payload from the surface of the moon (i.e., x = r) to an altitude of 5r miles above the surface of the moon (i.e., x = 6r)?

Answers: 2

Answer

Physics, 21.06.2019 22:00

Atank holds 1000 gallons of water, which drains from the bottom of the tank in half an hour. the values in the table show the volume v of water remaining in the tank (in gallons) after t minutes.t(min) 5 10 15 20 25 30v(gal) 694 444 250 111 28 0(a) if p is the point (15, 250) on the graph of v, find the slopes of the secant lines pq when q is the point on the graph with t = 5, 10, 20, 25, and 30.(b) estimate the slope of the tangent line at p by averaging the slopes of two secant lines.(c) use a graph of the function to estimate the slope of the tangent line at p. (this slope represents the rate at which the water is flowing from the tank after 15 minutes.)show all steps.

Answers: 2

Answer

Physics, 22.06.2019 02:30

Which is an example of gaining a static charge by conduction? a) rubbing a balloon against your hair. b) shuffling your shoes across a carpet. c) bringing a charged rod near an electroscope. d) touching your car on a cold day and getting a shock.

Answers: 1

Answer

Physics, 22.06.2019 16:00

Which composition of water moves to begin a deepwater current?

Answers: 2

Answer

You know the right answer?

Awheel with a weight of 395 n comes off a moving truck and rolls without slipping along a highway. a...

Questions