Acarnot engine is held between a furnace with a constant temperature of 400° c and the outside environment at a constant temperature of 30° c. there is a leak in the system which allows heat to escape directly from the furnace to the environment. the efficiency of the engine, including the effect of the leak, is 0.25. what is the ratio of the heat that flows into the carnot engine (qh1) to the heat that flows directly to the environment (qh2)? qh1/qh2 =

Aforce of 34n stretches a very light ideal spring 0.73 m from equilibrium, what is the force constant (spring constant) of the spring? (a) 47n/m (b) 38n/m (c) 53n/m (d) 25n/m

Two forces produce equal torques on a door about the door hinge. the first force is applied at the midpoint of the door; the second force is applied at the doorknob. both forces are applied perpendicular to the door. which force has a greater magnitude?

Aspring has a relaxed length of 33 cm (0.33 m) and its spring stiffness is 6 n/m. you glue a 76 gram block (0.076 kg) to the top of the spring, and push the block down, compressing the spring so its total length is 15 cm. you make sure the block is at rest, then at time t=0 you quickly move your hand away. the block begins to move upward, because the upward force on the block by the spring is greater than the downward force on the block by the earth. calculate y vs. time for the block during a 0.09-second interval after you release the block, by applying the momentum principle in three steps each of 0.03-second duration.