Physics, 19.11.2019 20:31 holmesleauja

A225-g object is attached to a spring that has a force constant of 74.5 n/m. the object is pulled 6.25 cm to the right of equilibrium and released from rest to slide on a horizontal, frictionless table. calculate the maximum speed of the object.
find the locations of the object when its velocity is one-third of the maximum speed. treat the equilibrium position as zero, positions to the right as positive, and positions to the left as negative.

Answers: 3

Show answers

Another question on Physics

Physics, 22.06.2019 00:30

Next a skier is pulled by a tow rope up a frictionless ski slope that makes an angle of 15 with the horizontal. the rope moves parallel to the slope with a constant speed of 0.69 m/s. the force of the rope does 800 3 of work on the skier as the skier moves a distance of 8.4 m up the incline. (a) if the rope moved with a constant speed of 2.2 m/s how much work would the force of the rope do on the skier as the skler moved a distance of 8.4 m up the incline? at what rate is the force of the rope doing work on the skier when the rope moves with a speed of (b) 0.69 m/s and (c) 2.2 m/s?

Answers: 1

Answer

Physics, 22.06.2019 17:50

If there's a small amount of friction between two surfaces, the result could be select all that applya. no movement b. heatc. a little bit of movementd. sliding around

Answers: 2

Answer

Physics, 22.06.2019 21:00

Acentrifuge in a medical laboratory rotates at an angular speed of 3,700 rev/min. when switched off, it rotates through 54.0 revolutions before coming to rest. find the constant angular acceleration (in rad/s2) of the centrifuge. your response is within 10% of the correct value. this may be due to roundoff error, or you could have a mistake in your calculation. carry out all intermediate results to at least four-digit accuracy to minimize roundoff error. rad/s2

Answers: 1

Answer

Physics, 22.06.2019 21:40

Wo small variable-thrust jets are actuated to keep the spacecraft angular velocity about the z-axis constant at ? 0 = 1.16 rad/s as the two telescoping booms are extended from r1 = 1.18 m to r2 = 4.69 m at a constant rate over a period of 124 seconds. the small 19-kg experiment modules at the ends of the booms may be treated as particles, and the mass of the rigid booms is negligible. determine the necessary thrust t for each jet as a function of time where t = 0 is the time when the telescoping action is begun. after you have the general expression for t, answer the questions. show work.

Answers: 1

Answer

You know the right answer?

A225-g object is attached to a spring that has a force constant of 74.5 n/m. the object is pulled 6....

Questions