)a 30-mm-thick plate made of low carbon steel is to be reduced to 25 mm in one pass in a rolling operation. as the thickness is reduced, the plate widens by 4%. yield strength of the steel = 174 mpa, and tensile strength = 450 mpa. the entrance speed of the plate = 77 m/min. roll radius = 350 mm, and rotational speed = 45 rev/min. determine (a) the minimum required coefficient of friction that would make this rolling operation possible, (b) exit velocity of the plate, and (c) forward slip.

a. 0.12, b. 88.84m/min, c. -0.101

Explanation:

a. μf

Maximum depth of reduction d = μ²R where R is the Roll Radius

dm - dt = μ²Rr

30 - 25 = μ² x 350mm

μf = √(5/350) = 0.1195 = 0.12

b. Exit Velocity

since the volume of the plate would remain the same after the operation we can state that

Thickness initial x Width initial x Entrance Velocity = Thickness Final x Wdith Final x Exit Velocity

The plate widens 4% which means Wf = 1.04Wi

Substituting the values into above equation

30 x Wi x 77 = 25 x 1.04Wi x Vf

Vf = (30 x 77)/(25 x 1.04) = 88.84m/min

c. Forward Slip S

S = (Vf - Vr)/Vr

Vr = πDN where D is the diameter of the roller, and N is the Rotational Speed of the roller

Vr = π x (2 x 350 x 10^-3) x 45 = 98.91 m/min

S = (88.84 - 98.91)/98.91 = -0.101

science is a systematic and logical approach to discovering how things in the universe work. true to this definition, science aims for measurable results through testing and analysis. science is based on fact, not opinion or preferences. the process of science is designed to challenge ideas through research.

explanation:

causes

fossil fuels burn

cities become more industrialized

human population grows worldwide