subject
Physics, 09.11.2019 03:31 ashantiwilliams11120

Atoy jeep rolls down an incline at a constant velocity. the jeep's mass is m = 1.7 kg and the ramp makes an angle of θ = 12 degrees with respect to the horizontal. assume the rolling resistance is negligible. part (a) what is the magnitude of the jeep's acceleration, a in m/s2? numeric : a numeric value is expected and not an expression. a = part (b) what is the numeric value for the sum of the forces in the x-direction, σfx, in newtons?

ansver
Answers: 3

Another question on Physics

question
Physics, 22.06.2019 00:30
Next a skier is pulled by a tow rope up a frictionless ski slope that makes an angle of 15 with the horizontal. the rope moves parallel to the slope with a constant speed of 0.69 m/s. the force of the rope does 800 3 of work on the skier as the skier moves a distance of 8.4 m up the incline. (a) if the rope moved with a constant speed of 2.2 m/s how much work would the force of the rope do on the skier as the skler moved a distance of 8.4 m up the incline? at what rate is the force of the rope doing work on the skier when the rope moves with a speed of (b) 0.69 m/s and (c) 2.2 m/s?
Answers: 1
question
Physics, 22.06.2019 07:10
Polly is pushing a box across the floor with a force of 30 n. the force of gravity is –8 n, and the normal force is 8 n. which value could describe the force of friction if polly could not move the box?
Answers: 2
question
Physics, 22.06.2019 08:20
A3030 cmcm wrench is used to loosen a bolt with a force applied 0.30.3 mm from the bolt. it takes 6060 nn to loosen the bolt when the force is applied perpendicular to the wrench. how much force would it take if the force was applied at a 3030 degree angle from perpendicular? a 3030 cmcm wrench is used to loosen a bolt with a force applied 0.30.3 mm from the bolt. it takes 6060 nn to loosen the bolt when the force is applied perpendicular to the wrench. how much force would it take if the force was applied at a 3030 degree angle from perpendicular?
Answers: 3
question
Physics, 22.06.2019 10:20
Asmall object with mass 0.200 kg swings back and forth on the lower end of a light rope that is 3.00 m long. the upper end of the rope is attached to the ceiling. as the object swings through its lowest position, where the rope is vertical, the speed of the object is 5.80 m/s. at this point in the motion, what is the tension in the rope? (use g = 9.80 m/s2.)
Answers: 2
You know the right answer?
Atoy jeep rolls down an incline at a constant velocity. the jeep's mass is m = 1.7 kg and the ramp m...
Questions
question
History, 27.07.2019 08:30
Questions on the website: 13722362