Technician a says that all friction and steel plates in a clutch pack should be replaced during an overhaul. technician b says that the automatic transmission fluid cooler should always be flushed when a unit is rebuilt or replaced. which technician is correct?

Technician B is Correct

Explanation:

The correct answer from the question is B because it is mandatory for the transmission cooler to be flushed and thoroughly checked to ensure there is proper flow whenever the automatic transmission unit is to be replaced or even rebuilt. This is to ensure that the fluid in the transaxle is properly cooled so that any form of harm can be prevented. On the other hand, Technician A is wrong in his opinion because it is not mandatory to replace the steel plates even if the friction discs is to be replaced during an overhaul.

Technician A is correct and Technician B is wrong

Explanation:A torque converter transfers power from an internal combustion engine to the driven load rotating. power flows from the engine through the torque converter to the transmission and through the transmission to the drives before it is sent to the rare wheels of a car.

d is the answer i came up with

f=ma a/f/m a= 480/60 a = 8m/s/s that is quick wow