Temperature sensing in a light bulb. incandescent lightbulbs use a tungsten wire as the light-producing filament by heating it to a temperature at which it is bright enough to produce light. the temperature of the wire can be estimated directly from the power rating and the resistance of the wire when it is cold. given a 120 v, 100 w lightbulb with a resistance of 22 w at room temperature (20c): a. calculate the temperature of the filament when the lightbulb is lit. b. what are the possible sources of error in this type of indirect sensing? explain.

Select the correct answer from each drop-down menu. compared to its surroundings, the concentration of solutes is low inside a cell. so, the cell is with respect to its surroundings. a particular solute in this cell uses energy for its transport from the cell to its surroundings. this type of transport is called

Clothing made of several thin layers of fabric with trapped air in between, often called ski clothing, is commonly used in cold climates because it is light, fashionable, and a very effective thermal insulator. so it is no surprise that such clothing has largely replaced thickand heavy old-fashioned coats. (a) consider a jacket made of five layers of 0.1-mm-thick synthetic fabric (k = 0.13 w/m·°c) with 1.5-mm-thick air space (k = 0.026 w/m·°c) between the layers. assuming the inner surface temperature of the jacket to be 28°c and the surface area to be 1.25 m2, determine the rate of heat loss through the jacket when the temperature of the outdoors is 0°c and the heat transfer coefficient at the outer surface is 25 w/m2·°c. (b) what would your response be if the jacket is made of a single layer of 0.5-mm-thick synthetic fabric? what should be the thickness of a wool fabric (k = 0.035 w/m·°c) if the person is to achieve the same level of thermal comfort wearing a thick wool coat instead of a five-layer ski jacket?

Which statement is best supported by the information in the chart? wave y is moving the fastest. wave x is moving the fastest. all of the waves are moving at the same speed. all of the waves have the same value of wavelengths per second.