Design the mos amplifier above to obtain maximum gain while allowing for an output voltage swing of at least +- 0.5v. let vdd = 5v and utilize an overdrive voltage of approximately 0.2v a)specify the vds at the bias point b) what is the gain achieved? what is the signal amplitude vgs that results in the 0.5-v signal amplitude at the output? c)if the dc bias current in the drain is to be 100ua what value of rd is needed? d) if k'n = 200 ua/v^2 , what w/l ratio is required for the mosfet?

Abasketball star covers 2.65 m horizontally in a jump to dunk the ball. his motion through space can be modeled precisely as that of a particle at his center of mass. his center of mass is at elevation 1.02 m when he leaves the floor. it reaches a maximum height of 1.90 m above the floor and is at elevation 0.910 m when he touches down again. (a) determine his time of flight (his "hang time"). (b) determine his horizontal velocity at the instant of takeoff. (c) determine his vertical velocity at the instant of takeoff. (d) determine his takeoff angle. (e) for comparison, determine the hang time of a whitetail deer making a jump with center-of-mass elevations yi = 1.20 m, ymax = 2.45 m, and yf = 0.750 m.