The 1994 winter olympics included the aerials competition in skiing. in this event skiers speed down a ramp that slopes sharply upward at the end. the sharp upward slope launches them into the air, where they perform acrobatic maneuvers. in the women's competition, the end of a typical launch ramp is directed 61° above the horizontal. with this launch angle, a skier attains a height of 16 m above the end of the ramp. what is the skier's launch speed?

1134567 a jet with mass m = 1.1 ă— 105 kg jet accelerates down the runway for takeoff at 2 m/s2. 1) what is the net horizontal force on the airplane as it accelerates for takeoff? 2.2*10^5 n your submissions: 2.2*10^5 computed value: 220000submitted: saturday, january 26 at 2: 41 pm feedback: correct! 2) what is the net vertical force on the airplane as it accelerates for takeoff? 0 n your submissions: 0 computed value: 0submitted: saturday, january 26 at 2: 41 pm feedback: correct! 3) once off the ground, the plane climbs upward for 20 seconds. during this time, the vertical speed increases from zero to 21 m/s, while the horizontal speed increases from 80 m/s to 95 m/s. what is the net horizontal force on the airplane as it climbs upward? n 4) what is the net vertical force on the airplane as it climbs upward? n 5) after reaching cruising altitude, the plane levels off, keeping the horizontal speed constant, but smoothly reducing the vertical speed to zero, in 13 seconds. what is the net horizontal force on the airplane as it levels off? n 6) what is the net vertical force on the airplane as it levels off?

Acyclotron is used to produce a beam of high-energy deuterons that then collide with a target to produce radioactive isotopes for a medical procedure. deuterons are nuclei of deuterium, an isotope of hydrogen, consisting of one neutron and one proton, with total mass 3.34×10−27kg. the deuterons exit the cyclotron with a kinetic energy of 6.40 mev .a-what is the speed of the deuterons when they exit? b-if the magnetic field inside the cyclotron is 1.25 t, what is the diameter of the deuterons' largest orbit, just before they exit? c-if the beam current is 350 μa how many deuterons strike the target each second?

Ball bearings are made by letting spherical drops of molten metal fall inside a talll tower-called a shot tower- and solidify as they fall. a-if a bearing needs 4.0 s to solidify enough for impact, how high must the tower be? b- what is the bearing's impact velocity?