Consider a solid sphere, determined by the volume x^2 + y^2 + z^2 ≤ r^2 , with a non-uniform density rho(x, y, z) = a|z|. determine the total mass of the sphere in terms of a and r. b) consider a flat disk of radius r, with an areal mass density given by σ(r, θ) = ar^2 sin^2 (θ), where a is a given constant. describe in words and a simple sketch this mass density. then, determine the total mass of the thin disk in terms of a and r.

Suppose that two tanks, 1 and 2, each with a large opening at the top, contain different liquids. a small hole is made in the side of each tank at the same depth 1.57 m below the liquid surface, but the hole in tank 2 has 2.49 times the cross-sectional area of the hole in tank 1. (a) what is the ratio ρ1/ρ2 of the densities of the liquids if the mass flow rate is the same for the two holes? (b) what is the ratio rv1/rv2 of the volume flow rates from the two tanks? (c) at one instant, the liquid in tank 1 is 14.9 cm above the hole. if the tanks are to have equal volume flow rates, what height above the hole must the liquid in tank 2 be just then?

Acylinder with a movable piston contains 11.7 moles of a monatomic ideal gas at a pressure of 1.32×10^5 pa. the gas is initially at a temperature of 300 k. an electric heater adds 43200 j of energy into the gas while the piston moves in such a way that the pressure remains constant. cp=20.79 j k^−1 mol^−1 for a monatomic ideal gas, and that the number of gas molecules is equal to avogadro's number (6.022×10^23) times the number of moles of the gas. (a) what is the temperature of the gas after the energy is added? (b) what is the change in volume of the gas? (c) how much work is done by the gas during this process?

In positive numbers less than 1, the zeros between the decimal point and a non-zero number are blank significant