Name 3 constellations that are on the ecliptic and visible at this time

also right now we are in ZODIAC SEASON OF  Libra WE JUST PASSED VIRGO AND WE ARE HEADING INTO the constellations of fall  are Aquarius, Grus, Lacerta, Octans, Pegasus and Piscis Austrinus. Lacerta and Pegasus are located in the northern sky

Explanation:

The five northern constellations visible from most locations north of the equator throughout the year are Cassiopeia, Cepheus, Draco, Ursa Major, and Ursa Minor.

The three southern circumpolar constellations visible from most locations in the southern hemisphere are Carina, Centaurus, and Crux.

The ecliptic currently passes through the following constellations:

Pisces.

Aries.

Taurus.

Gemini.

Cancer.

Leo.

Virgo.

Libra.    hope it helps

most voltage drop calculators want the distance between the source and destination. then internally, they double it so both the source and return wires are calculated. but you need to know which distance the calculator uses so you're not half of what you should be or double what you should be.

most circuit breakers will not take a #6 directly, so the electrician will have to splice on a smaller pigtail. you also have to upsize the grounding wire when you upsized the ungrounded (hot) wire (see note in 250.122). this will preclude using most cable assemblies, as a cable with #6 copper will most likely only have a #10 grounding conductor. you need a #6 grounding conductor if the circuit is 20a. a #8 cable is no better, as it will have a #10 grounding conductor too. but most 20a breakers will take a #8 directly.

in your related post, you didn't say what type of load this is. if it is a light or heater, voltage drop won't be a big issue. if this is a motor, the current needs are huge at startup and the voltage drop can pose a problem. if this is a motor, knowing if the motor is under much load during startup will answer the voltage drop effect (a saw is easier to start than a compressor).

where are the vectors ?