The ink drops have a mass m = 1.00×10^−11 kg each and leave the nozzle and travel horizontally toward the paper at velocity v = 23.0 m/s . the drops pass through a charging unit that gives each drop a positive charge q by causing it to lose some electrons. the drops then pass between parallel deflecting plates of length d0 = 1.80 cm , where there is a uniform vertical electric field with magnitude e = 8.20×10^4 n/c if a drop is to be deflected a distance d = 0.290 mm by the time it reaches the end of the deflection plate, what magnitude of charge q must be given to the drop? assume that the density of the ink drop is 1000 kg/m^3

Astring that is fixed at both ends has a length of 1.05 m. when the string vibrates at a frequency of 91.0 hz, a standing wave with five loops is formed. (a) what is the wavelength of the waves that travel on the string? (b) what is the speed of the waves? (c) what is the fundamental frequency of the string?

What are the phases shown in a and d called?

In a steady-flow steam power plant system, two adiabatic high-pressure and low-pressure turbines ane used to generate power. superheated steam enters the high-pressure turbine at 8 mpa and 550°c. the steam expands in the high-pressure turbine to a saturated vapor at 3 mpa. in order to increase the powe generation of the power plant, another steam turbine working in a lower pressure ranges is deployed. the outlet vapor from the first turbine is heated up at a boiler to the temperature of 500 c at the constant pressure of first turbine's outlet (3 mpa). then, the vapor enters the second turbine and produces extra work. the exit conditions of the second turbine are 5o kpa and 90 percent quality. if the total power output of the power plant is 25 mw, determine a) the mass flow rate of the water (kg/s). b) heat transfer rate in the boiler (mw). (30 points) 3 mpa 00 c 8 mpa s0 c high pres turbine low pres boiler turbine 50 kpa 3 mpa 09 saturated vapor t heat engine, shown in the figure, operates between high temperature and low temperature of through a heat 4. a carnot tn and tu respectively. this heat engine receives energy from a heat reservoir at t exchanger where the heat transferred is proportional to the temperature difference as ? = k (z,-7, ). it rejects heat at a given low temperature tl. to design the heat engine for maximum work output, find the high temperature, th, as a function of tes and t. (15 points) qe