Physics, 14.09.2019 08:20 anilauferc

Three point charges are arranged along the x-axis. charge q1 = +3.00 μc is at the origin, and charge q2 = -5.00 μc is at x = 0.200 m. charge q3 = -8.00 μc. where is q3 located if the net force on q1 is 7.00 n in the -x-direction?

Answers: 3

Show answers

Another question on Physics

Physics, 21.06.2019 19:30

Describe the path of a ray that approaches a mirror parallel to the principal axis.

Answers: 2

Answer

Physics, 21.06.2019 20:40

In a steady-flow steam power plant system, two adiabatic high-pressure and low-pressure turbines ane used to generate power. superheated steam enters the high-pressure turbine at 8 mpa and 550°c. the steam expands in the high-pressure turbine to a saturated vapor at 3 mpa. in order to increase the powe generation of the power plant, another steam turbine working in a lower pressure ranges is deployed. the outlet vapor from the first turbine is heated up at a boiler to the temperature of 500 c at the constant pressure of first turbine's outlet (3 mpa). then, the vapor enters the second turbine and produces extra work. the exit conditions of the second turbine are 5o kpa and 90 percent quality. if the total power output of the power plant is 25 mw, determine a) the mass flow rate of the water (kg/s). b) heat transfer rate in the boiler (mw). (30 points) 3 mpa 00 c 8 mpa s0 c high pres turbine low pres boiler turbine 50 kpa 3 mpa 09 saturated vapor t heat engine, shown in the figure, operates between high temperature and low temperature of through a heat 4. a carnot tn and tu respectively. this heat engine receives energy from a heat reservoir at t exchanger where the heat transferred is proportional to the temperature difference as ? = k (z,-7, ). it rejects heat at a given low temperature tl. to design the heat engine for maximum work output, find the high temperature, th, as a function of tes and t. (15 points) qe

Answers: 3

Answer

Physics, 22.06.2019 20:20

An electron is trapped at a defect in a crystal. the defect may be modeled as a one-dimensional, rigid-walled box of width 1.00 nm. (a) sketch the wavefunctions and probability densities for the n 1 and n 2 states. (b) for the n 1 state, nd the probability of nding the electron between x1 0.15 nm and x2 0.35 nm, where x 0 is the left side of the box. (c) repeat (b) for the n 2 state. (d) calculate the energies in electron volts of the n 1 and n 2 states

Answers: 1

Answer

Physics, 23.06.2019 01:10

Calculate 9 ∙ 10-5 divided by 3 ∙ 10-9. (box after the "10" in answer is for the

Answers: 1

Answer

You know the right answer?

Three point charges are arranged along the x-axis. charge q1 = +3.00 μc is at the origin, and charge...

Questions