Steam at 0.6 mpa, 200 oc, enters an insulated nozzle with a velocity of 50 m/s. it leaves at a pressure of 0.15 mpa and a velocity of 600 m/s. determine the final temperature if the steam is superheated in the final state, and the quality if it is saturate

x2 = 0.99

Explanation:

from superheated water table

at pressure p1 = 0.6MPa and temperature 200 degree celcius

h1 = 2850.6 kJ/kg

From energy equation we have following relation

h2 = 2671.85 kJ/kg

from superheated water table

at pressure p2 = 0.15MPa

specific enthalpy of fluid hf = 467.13 kJ/kg

enthalpy change hfg = 2226.0 kJ/kg

specific enthalpy of the saturated gas hg = 2693.1 kJ/kg

as it can be seen from above value hf>h2>hg, so phase 2 is two phase region. so we have

quality of steam x2

h2 = hf + x2(hfg)

2671.85 = 467.13 +x2*2226.0

x2 = 0.99

a solenoid is created by wrapping a l = 90 m long wire around a hollow tube of diameter d = 4.5 cm.   the wire diameter is d = 0.9 mm.   the solenoid wire is then connected to a power supply so that a current of i = 9 a flows through the wire.

randomized variablesl = 90 m

d = 4.5 cm

d = 0.9 mm

i = 9 a                                          

write an expression for the number of turns, n, in the solenoid. you do not need to take into account the diameter of the wire in this calculation.

calculate the number of turns, n, in the solenoid.

write an expression for the length of the solenoid (l2) in terms of the diameter of the hollow tube d.

calculate the length of the solenoid (l2)   in meters.

calculate the magnitude of the magnetic field at the center of the solenoid in teslas.

explanation: