Suppose a certain car supplies a constant deceleration of a meter per second per second. if it is traveling at 90km/hr. when. the brakea are applied, its stopping distance is 50 metres. i) what is a (ii) what would be the stopping distance if the car had been traveling at 54km/hr when the branches were applied? (iii) at what speed is the car traveling when the branches are applied if the stopping distance is 56 metres

i)-6.25m/s

ii)18 metres

iii)26.5 m/s or 95.4 km/hr

Explanation:

Firstly convert 90km/hr to m/s

90 × 1000/3600 = 25m/s

(i) Apply v^2 = u^2 + 2As...where v(0m/s) is the final speed and u(25m/s) is initial speed and also s is the distance moved through(50 metres)

0 = (25)^2 + 2A(50)

0 = 625 + 100Athen moved the other value to one

-625 = 100A

Hence A = -6.25m/s^2(where the negative just tells us that its deceleration)

(ii) Firstly convert 54km/hr to m/s

In which this is 54 × 1000/3600 = 15m/s

then apply the same formula as that in (i)

0 = (15)^2 + 2(-6.25)s

-225 = -12.5s

Hence the stopping distance = 18metres

(iii) Apply the same formula and always remember that the deceleration values is the same throughout this question

0 = u^2 + 2(-6.25)(56)

u^2 = 700

Hence the speed that the car was travelling at is the,square root of 700 = 26.5m/s

In km/hr26.5 × 3600/1000 = 95.4 km/hr

answer: the rock sample is a sedimentary rock.

explanation:

it is given that:

mass of rock sample, m = 2.7 g

volume of rock sample,

so, density of rock sample will be

since, the density of rock sample is . hence, the rock sample is a sedimentary rock, whose densities varies between .

v 154.9= 0.9 length length s little over 154.9cm