You have been hired to design a spring-launched roller coaster that will carry two passengers per car. the car goes up a 12--high hill, then descends 20 to the track's lowest point. you've determined that the spring can be compressed a maximum of 2.3 and that a loaded car will have a maximum mass of 410 . for safety reasons, the spring constant should be 15 larger than the minimum needed for the car to just make it over the top.
(a) what spring constant should you specify?
(b)what is the maximum speed of a 370 car if the spring is compressed the full amount?

(a) Based on the safety reasons, the spring constant to be specified is    1761.97 N/m.

(b) The speed of 370 kg car when the spring is compressed fully is 5.02 m/s.

The given parameters;

The weight of the car is calculated as follows;

W = mg

W = 410 x 9.8 = 4018 N

The spring constant is calculated as;

F = kx

Based on the safety reasons, the spring constant to be specified is calculated as;

k = 1746.97 + 15 = 1761.97 N/m

(b)

The speed of 370 kg car when the spring is compressed fully is calculated as;

Learn more here:link

Part a)

Part b)

Explanation:

Part a)

A car can go maximum 12 m high hill and then come back to other end at the depth of 20 m

So here by energy conservation we can say

Energy stored in the spring = gravitational potential energy at the top

now spring constant is 15 times larger than this value

so we have

Part b)

When mass of the car is m = 370 kg

then the highest speed of the car when it will reach the lowest point is given as

1/0.14nm = 10^10/1.4 a lot

the small 0.38-kg slider is known to move from position a to position b along the vertical-plane slot. determine (a) the work done on the body by its weight and (b) the work done on the body by the spring. the distance r = 0.70 m, the spring modulus k = 154 n/m, and the unstretched length of the spring is 0.53 m

explanation:

-reverse card