Physics, 24.07.2019 20:10 queenkimm26

9.96 kg of r-134a at 300 kpa fills a rigid container whose volume is 14 l. determine the temperature and total enthalpy in the container. the container is now heated until the pressure is 600 kpa. determine the temperature and total enthalpy when the heating is completed. use data from the steam tables.

Answers: 1

Show answers

Answers

Answer from: tacojordan4128

At 300 kPa: The temperature is 0.529 ºC and the total enthalpy, 2016.77kJ.

At 600 kPa: The temperature is 21.45 ºC and the total enthalpy, 2317.00 kJ.

Explanation:

1. Get the container volume in cubic meters: $1m^{3}=1000L$

$V=14L*\frac{1m^{3}}{1000L} =0.014m^{3}$

2. Find the specific volume of R-134a:

$v=\frac{V}{m}=\frac{0.014m^{3}}{9.96kg}=0.001416\frac{m^{3}}{kg}$

3. Find the phase of R-134a, for this, look at the steam tables (Note: I am using the table B.5.1 from van Wylen 6th Edition.) Look for a pressure of 300 kPa at the table; I found this values:

T(ºC) P(kPa) vf( $\frac{m^{3}}{kg}$ vg( $\frac{m^{3}}{kg}$

0 294.0 0.000773 0.06919

5 350.9 0.000783 0.05833

It is possible to predict that the properties of saturated R134-a at 300 kPa would be so closely to that of 294 kPa. From that data we find that the specific volume of our R134-a is between vf and vg, so we conclude that it is a vapor liquid mixture.

4. Find the quality (x)

From a linear interpolation for the pressure, it is possible to know the saturation data for 300 KPa:

T(ºC) P(kPa) vf( $\frac{m^{3}}{kg}$ vg( $\frac{m^{3}}{kg}$

0.529 300 0.0007405 0.06796

Applying the quality relation for specific volume:

$v=v_{f}+xv_{fg}\\x=\frac{v-v_{f}}{v_{fg}}\\x=0.009989$

The total enthalpy is calculated in the same way:

$h=h_{f}+xh_{fg}\\h=200.71+0.00898*197.96=202.48 \frac{kJ}{kg}$

H=202.48*9.96=2016.77kJ

The temperature is 0.529 ºC and the total enthalpy, 2016.77kJ.

When the substance is heated, the volume remains constant because the container is rigid, so the calculation requires to do the same process again with 600 kPa.

T(ºC) P(kPa) vf( $\frac{m^{3}}{kg}$ vg( $\frac{m^{3}}{kg}$

21.45 600 0.000820 0.03458

hf( $\frac{kJ}{kg}$ hg( $\frac{kJ}{kg}$

229.56 406.13

x=0.0173

$h=232.63 \frac{kJ}{kg}$

H=m*h=2317.00kJ

The temperature is 21.45 ºC and the total enthalpy, 2317.00 kJ.

Answer from: Quest

the area between the graph and the t axis

Answer from: Quest

jupiter is the largest planet in our solar system, having a mass and radius that are respectively, 318 and 11.2 times that of earth. suppose that an object falls from rest near the surface of each planet and that the acceleration due to gravity remains constant during the fall. each object falls the same distance before striking the ground. determine the ratio of the time of fall on jupiter to that on earth.

Another question on Physics

Physics, 22.06.2019 11:00

A2.00-m long piano wire with a mass per unit length of 12.0 g/m is under a tension of 8.00 kn. what is the frequency of the fundamental mode of vibration of this wire?

Answers: 3

Answer

Physics, 22.06.2019 15:10

What does si stand for,when referring to a system of measurement

Answers: 1

Answer

Physics, 22.06.2019 18:30

Adisk with a radius of r is oriented with its normal unit vector at an angle q with respect to a uniform electric field. which of the following would result in an increase in the electric flux through the disk? check all that apply? a. increasing the area of the disk b. decreasing the given orientation angle of the disk c. decreasing the strength of the electric field d. increasing the given orientation angle of the disk, but not exceeding an angle of 90

Answers: 1

Answer

Physics, 23.06.2019 00:30

If you let go of the notebook after lifting it, will it move? how?

Answers: 1

Answer

You know the right answer?

9.96 kg of r-134a at 300 kpa fills a rigid container whose volume is 14 l. determine the temperature...

Questions