Arigid bar eh is supported by two steel wire of 1/16 in diameter (e=29 106psi) and a pin and bracket at h. knowing that the wires were initially tight. determine (a) the additional tension in each wire when a 200-lb load p is applied at e. (b) the corresponding deflection (downward displacement) of point e.

Bob camina 200 m sur, luego trota 400 m suroeste, luego camina 200 m en una dirección 30? norte del este. a. dibuje una gráfica de los movimientos de bob. use una regla y transportador. b. use método gráfico y analíitico para hallar el desplazamiento total que bob recorrió. (magnitud y dirección) c. compare los resultados obtenidos por el método gráfico y analítico. (por ciento de diferencia).

Power can be defined as a. the distance over which work was done. b. how much work can be done in a given time. c. all the work in an given area. d. the energy required to do work.

The frequency of vibrations of a vibrating violin string is given by f = 1 2l t ρ where l is the length of the string, t is its tension, and ρ is its linear density.† (a) find the rate of change of the frequency with respect to the following. (i) the length (when t and ρ are constant) (ii) the tension (when l and ρ are constant) (iii) the linear density (when l and t are constant) (b) the pitch of a note (how high or low the note sounds) is determined by the frequency f. (the higher the frequency, the higher the pitch.) use the signs of the derivatives in part (a) to determine what happens to the pitch of a note for the following. (i) when the effective length of a string is decreased by placing a finger on the string so a shorter portion of the string vibrates df dl 0 and l is ⇒ f is ⇒ (ii) when the tension is increased by turning a tuning peg df dt 0 and t is ⇒ f is ⇒ (iii) when the linear density is increased by switching to another string df dρ 0 and ρ is ⇒ f is ⇒