subject
Physics, 26.06.2019 03:50 Davon21

High speed cameras are used to photograph events which take place too quickly to be seen by the human eye. one such high speed camera is composed of a rotating film drum, a rotating shutter and some miscellaneous optics. the film is fastened along the outside of the drum (along its entire circumference) and the drum is driven by high pressure gas. you desire to photograph the dynamics of a bumblebee in flight and estimate that its wings flap somewhere about 10,000 times a second. the radius of the film drum is r = 0.501 m and you've loaded it with 35mm film. 1) how many photographs will fit along the circumference of the drum? (assume 35mm length is one photo) number = 2) you desire to take the photographs at a frequency of 20,000 hz. what is the angular frequency of the shutter? (note: shutter has one hole in it, and angular frequency is the same as angular velocity) ? = rad/s 3) what must the angular frequency of the film drum be? ? = rad/s 4) when the drum has taken its pictures, the gas is turned off and the drum slows down uniformly, finally setting to a standstill after 2 minutes. what was the angular acceleration of the film drum after turning off the gas? ? = rad/s2 5) how many times does the film drum rotate after the gas is turned off and before coming to rest? give your answers in revolutions.

ansver
Answers: 3

Another question on Physics

question
Physics, 22.06.2019 00:30
During spring semester at mit, residents of the parallel buildings of the east campus dorms battle one another with large catapults that are made with surgical hose mounted on a window frame. a balloon filled with dyed water is placed in a pouch attached to the hose, which is then stretched through the width of the room. assume that the stretching of the hose obeys hooke's law with a spring constant of 89.0 n/m. if the hose is stretched by 5.80 m and then released, how much work does the force from the hose do on the balloon in the pouch by the time the hose reaches its relaxed length? unitst 3 number-1497 the tolerance is +/-5% open show work click if you would like to show work for this question:
Answers: 2
question
Physics, 22.06.2019 10:50
Asheet of steel 1.5 mm thick has nitrogen atmospheres on both sides at 1200oc and is permitted to achieve a steady-state diffusion condition. the diffusion coefficient for nitrogen in steel at this temperature is 6 x 10- 11 m2 /s, and the diffusion flux is found to be 1.2 x 10-7 kg/m2 -s. also, it is known that the concentration of nitrogen in the steel at the high-pressure surface is 4 kg/m3 . how far into the sheet from this high-pressure side will the concentration be 2.0 kg/m3 ? assume a linear concentration profile.
Answers: 3
question
Physics, 22.06.2019 11:00
Alarge box of mass m is pulled across a horizontal frictionless surface by a horizontal rope with tension t. a small box of mass m sits on top of the large box. the coefficients of static and
Answers: 1
question
Physics, 22.06.2019 11:00
What is the measurement of how fast an object moves relative to a reference point?
Answers: 1
You know the right answer?
High speed cameras are used to photograph events which take place too quickly to be seen by the huma...
Questions
Questions on the website: 13722363