Why aren't homes wired in series? a. because it's too expensive. b. parallel circuits are too complex for home wiring. o c. because series circuits too easily cause fires. d. if a home were wired in series, every light and appliance would have to be turned on in order for any light or appliance to work.

D. If a home were wired in series, every light and appliance would have to be turned on in order for any light or appliance to work.

Explanation:

In a series circuit, all the appliances are connected on the same branch of the circuit, one after the other. This means that the current flowing throught them is the same. However, this means also that if one of the appliance is turned off (so, its switch is open), that appliance breaks the circuit, so the current can no longer flow through the other appliances either.

On the contrary, when the appliances are connected in parallel, they are connected in different branches, so if one of them is switched off, the other branches continue working unaffacted by it.

so here is the information for current research:

-nrel's geothermal analysts, scientists, and engineers perform a full range of research from developing advanced methods of locating and accessing geothermal resources to exploring innovative technologies to extract and produce clean energy from the heat of the earth

and here is the information for the technology of geothermal energy:

-it's clean and sustainable

-resources of geothermal energy range from the shallow ground to hot water and hot rock found a few miles beneath the earth's surface, and down even deeper to the extremely high temperatures of molten rock called magma

-almost everywhere, the shallow ground or upper 10 feet of the earth's surface maintains a nearly constant temperature between 50° and 60°f (10° and 16°c)

-geothermal heat pumps can tap into this resource to heat and cool buildings

-a geothermal heat pump system consists of a heat pump, an air delivery system (ductwork), and a heat exchanger-a system of pipes buried in the shallow ground near the building

-in the winter, the heat pump removes heat from the heat exchanger and pumps it into the indoor air delivery system

-in the summer, the process is reversed, and the heat pump moves heat from the indoor air into the heat exchanger

-the heat removed from the indoor air during the summer can also be used to provide a free source of hot water

spare some change and give it to the poor

explanation:

plz : ((