Agroup of students put a ford focus in neutral and push the car with 500 n of force to the right, causing the car to travel a distance of 10 meters. how much work did the students do on the car?

Acar accelerates from 5.0 m/s to to 11 m/s at a rate of 3.0 m/s^2. how far does it travel while accelerating? 20m 117m 43m 16m

Aspring with a mass of 2 kg has a damping constant 14 kg/s. a force of 3.6 n is required to keep the spring stretched 0.3 m beyond its natural length. the spring is stretched 0.6 m beyond its natural length and then released. find the position of the mass at any time t. (assume that movement to the right is the positive x-direction and the spring is attached to a wall at the left end.)

In a steady-flow steam power plant system, two adiabatic high-pressure and low-pressure turbines ane used to generate power. superheated steam enters the high-pressure turbine at 8 mpa and 550°c. the steam expands in the high-pressure turbine to a saturated vapor at 3 mpa. in order to increase the powe generation of the power plant, another steam turbine working in a lower pressure ranges is deployed. the outlet vapor from the first turbine is heated up at a boiler to the temperature of 500 c at the constant pressure of first turbine's outlet (3 mpa). then, the vapor enters the second turbine and produces extra work. the exit conditions of the second turbine are 5o kpa and 90 percent quality. if the total power output of the power plant is 25 mw, determine a) the mass flow rate of the water (kg/s). b) heat transfer rate in the boiler (mw). (30 points) 3 mpa 00 c 8 mpa s0 c high pres turbine low pres boiler turbine 50 kpa 3 mpa 09 saturated vapor t heat engine, shown in the figure, operates between high temperature and low temperature of through a heat 4. a carnot tn and tu respectively. this heat engine receives energy from a heat reservoir at t exchanger where the heat transferred is proportional to the temperature difference as ? = k (z,-7, ). it rejects heat at a given low temperature tl. to design the heat engine for maximum work output, find the high temperature, th, as a function of tes and t. (15 points) qe