subject
Physics, 17.07.2019 15:30 alondrabarraza

What is a factor that affects the size of mineral crystals formed in magma

ansver
Answers: 1

Another question on Physics

question
Physics, 21.06.2019 13:20
Adouble-slit experiment is performed with light of wavelength 600 nm. the bright interference fringes are spaced 1.8 mm apart on the viewing screen.what will the fringe spacing be if the light is changed to a wavelength of 400 nm? ?
Answers: 1
question
Physics, 21.06.2019 16:00
The rigid beam is supported by the three suspender bars. bars ab and ef are made of aluminum and bar cd is made of steel. if each bar has a cross-sectional area of 450 mm2, determine the maximum value of p if the allowable stress is (σallow)st = 200 mpa for the steel and ( σallow)al = 150 mpa for the aluminum. est = 200 gpa and eal = 70 gpa.
Answers: 2
question
Physics, 22.06.2019 02:50
Steam is generated in a boiler of a cogeneration plant at 10 mpa and 450°c at a steady rate of 5 kg/s. in normal operation, steam expands in a turbine to a pressure of 0.5 mpa and is then routed to the process heater, where it supplies the process heat. steam leaves the process heater as a saturated liquid and is pumped to the boiler pressure. in this mode, no steam passes through a condenser, which operates at 20 kpa. (a) determine the power produced in the turbine and the rate at which process heat is supplied in this mode. (b) determine the power produced in the turbine and the rate of process heat supplied if only 60 percent of the steam is routed to the process heater and the remainder is expanded to the condenser pressure. (3.32 mw; 9.69 mw; 4.25 mw; 5.82 mw)
Answers: 3
question
Physics, 22.06.2019 06:20
Atwo-stage air compressor operates at steady state, compression 10m^3/min of air from 100 kpa and 300k to 1200 kpa. an intercooler between the two stages cools the air to 300k at a constant pressure of 350 kpa. the compression processes are isentropic. a) calculate the power required to run the compressor, in kw b) compare the result to the power required for isentropic compression from the same inlet state to the same final pressure.
Answers: 1
You know the right answer?
What is a factor that affects the size of mineral crystals formed in magma...
Questions
question
Mathematics, 01.05.2021 02:30
question
Physics, 01.05.2021 02:30
Questions on the website: 13722367