subject

Mathematics, 17.09.2019 10:10 jforeman42

What is the expression for 3y divided by 8?

ansver

Answers: 2

Show answers

Another question on Mathematics

question

Mathematics, 21.06.2019 18:50

Astudent draws two parabolas on graph paper. both parabolas cross the x-axis at (-4, 0) and (6,0). the y-intercept of thefirst parabola is (0, –12). the y-intercept of the second parabola is (0-24). what is the positive difference between the avalues for the two functions that describe the parabolas? write your answer as a decimal rounded to the nearest tenth.

Answers: 2

question

Mathematics, 21.06.2019 20:30

Is the point (0, 8) on the x-axis or y-axis? how do you know?

Answers: 2

question

Mathematics, 21.06.2019 22:10

Which equation is y = -6x2 + 3x + 2 rewritten in vertex form?

Answers: 1

question

Mathematics, 22.06.2019 03:00

This size running track is usually called a 400 meter track. however if a person ran as close to the inside as possible on the track they would run less than 400 meters in one lap. how far away from the inside border would someone have to run to make one lap equal exactly 400 meters

Answers: 2

You know the right answer?

What is the expression for 3y divided by 8?...

Questions

question

Engineering, 11.07.2019 02:20

Aroom in a house is maintained at 25 °c by a heat pump. the air outside is at 9 °c. heat is being lost out a 4.5 mm thick single-pane window which is...

question

Engineering, 11.07.2019 02:20

What is an hr and cr steel that an engineer should know? explain them brief. a)-write two advantages and disadvantages of hr steels that an engineer...

question

Engineering, 11.07.2019 02:20

Abar of steel has the minimum properties se=276mpa, sy=413mpa, sut=551mpa. find the factor of safety guarding against a static failure, and either the...

question

Engineering, 11.07.2019 02:20

Saturated liquid (s. l.) ammonia at 10c is throttled to -15c a)- sketch the process on a p-v diagram b)- find p2, the exit pressure c)-find sgen, the...

question

Engineering, 11.07.2019 02:20

Acontainer filled with 45 kg of liquid water at 95°c is placed in a 90-m3 room that is initially at 12°c. thermal equilibrium is established after a w...

question

Engineering, 11.07.2019 02:20

An array of computer processors is mounted within a sealed square enclosure; cooling is implemented by attaching an aluminum heat sink (k-180 w/m"k)....

question

Engineering, 11.07.2019 02:20

Adiver weighing 200 pounds jumps from 1 foot above a diving board made from a 1-inch by 16-inch, 5-foot-long aluminum beam. e = 10.4 x 10? psi calcul...

question

Engineering, 11.07.2019 02:20

Air flows with a mass rate of 0.1 kg/s through an aluminum circular pipe of inner diameter d, 0.15 m and outer diameter do-0.20 m at inlet temperature...

question

Engineering, 11.07.2019 02:20

Aheat engine has a solar collector receiving 600 btu/hr per square foot, inside which a transfer medium is heated to 800 r. the collected energy power...

question

Engineering, 11.07.2019 02:20

Aheat pump cools a house at 20-c when the maximum outside temperature is 34°c. the house gains 0.7 kw per degree temperature difference from the ambie...

question

Engineering, 11.07.2019 02:20

Describe the available tools the iaea might use to effectively implement safeguards measures in those states with integrated safeguards...

question

Engineering, 11.07.2019 02:20

Consider a steady state heat flow through a 12 feet x 14 feet brick wall of thickness 15 inches and thermal conductivity 1.5 btu/(hr-ft-f). on a day w...

question

Engineering, 11.07.2019 02:20

The area under a velocity vs. time graph gives a. time b. distance c. acceleration d. speed...

question

Engineering, 11.07.2019 02:20

A75-kg block of iron casting at 600 k is thrown into a large lake that is at a temperature of 342 k. the iron block eventually reaches thermal equilib...

question

Engineering, 11.07.2019 02:20

Acar engine has a power output of 65 hp. if the fuel consumption rate of the car is 45 lbm/hr and the fuel has a heating value of 19,000 btu/lbm (that...

question

Engineering, 11.07.2019 02:20

What would be the increase in tractive force (negative lift) by the addition of a spoiler to a vehicle. find this for a vehicle traveling at 200 mph a...

question

Engineering, 11.07.2019 02:20

Neglecting the changes in kinetic and potential energies, determine the work required to compress 10 kg of steam isentropically from 0.2 mpa to 1.2 mp...

question

Engineering, 11.07.2019 02:20

If a particle moves with constant velocity along a curvilinear path of constant r of curvature (p), then the tangential acceleration will vary through...

question

Engineering, 11.07.2019 02:20

With the aid of suitable sketches, differentiate between transgranular (intragranular) fracture and intergranular fracture...

question

Engineering, 11.07.2019 02:20

If a particle moves with constant velocity along a curvilinear path of constant ra of curvature, then the magnitude of the normal acceleration will re...

More questions: Mathematics Another questions

Questions on the website: 13722360