subject
Mathematics, 16.02.2021 09:30 maribelarreolap4sgpj

(20 POINTS!!) The electrical resistance of a section of cylindrical wire varies directly with its length and inversely with the square of its diameter. A certain piece of wire has a length of 2m and a diameter of 0.001m. The resistance of this piece of wire is 0.05Ω (ohms). Find the electrical resistance of another wire, made of the same material, but with length 2.5m and diameter 0.00125m.

ansver
Answers: 1

Another question on Mathematics

question
Mathematics, 21.06.2019 12:30
The cost c, in dollars, for bananas depends on the weight w,in pounds, of the bananas. this situation is represented by the function rule c=0.5w (graph each function rule.tell whether the graph is continuous or discrete)
Answers: 1
question
Mathematics, 21.06.2019 15:50
If n stands for number sold and c stands for cost per item, in which column would you use the formula: ? a. column d c. column f b. column e d. column g
Answers: 1
question
Mathematics, 21.06.2019 18:00
How many triangles can be drawn with side lengths 4 centimeters, 4.5 centimeters, and 9 centimeters? explain
Answers: 1
question
Mathematics, 21.06.2019 18:40
Airplane speeds are measured in three different ways: (1) indicated speed, (2) true speed, and (3) ground speed. the indicated airspeed is the airspeed given by an instrument called an airspeed indicator. a plane’s indicated airspeed is different from its true airspeed because the indicator is affected by temperature changes and different altitudes of air pressure. the true airspeed is the speed of the airplane relative to the wind. ground speed is the speed of the airplane relative to the ground. for example, a plane flying at a true airspeed of 150 knots into a headwind of 25 knots will have a ground speed of 125 knots. the problems below refer to static and dynamic pressure. static pressure is used when a body is in motion or at rest at a constant speed and direction. dynamic pressure is used when a body in motion changes speed or direction or both. a gauge compares these pressures, giving pilots an indicated airspeed. in problem #s 1 and 2, use the following information. the indicated airspeed s (in knots) of an airplane is given by an airspeed indicator that measures the difference p (in inches of mercury) between the static and dynamic pressures. the relationship between s and p can be modeled by s=136.4p√+4.5. 1. find the differential pressure when the indicated airspeed is 157 knots. 2. find the change in the differential pressure of an airplane that was traveling at 218 knots and slowed down to195 knots. in problem #s 3 and 4, use the following information. the true airspeed t (in knots) of an airplane can be modeled by t=(1+a50,000) ⋅ s, where a is the altitude (in feet) and s is the indicated airspeed (in knots). 3. write the equation for true airspeed t in terms of altitude and differential pressure p. 4. a plane is flying with a true airspeed of 280 knots at an altitude of 20,000 feet. estimate the differential pressure. explain why you think your estimate is correct.
Answers: 2
You know the right answer?
(20 POINTS!!) The electrical resistance of a section of cylindrical wire varies directly with its le...
Questions
question
Social Studies, 26.01.2021 19:00
question
Mathematics, 26.01.2021 19:00
question
Mathematics, 26.01.2021 19:00
question
Mathematics, 26.01.2021 19:00
Questions on the website: 13722363