Drag the tiles to the boxes to form correct pairs. At a railway yard, locomotives are used to haul containers carrying oil. A locomotive is chosen according to the volume of oil it can haul, as shown in the table.

Locomotive Capacity
A450 0−750 cubic feet
CG35 750−1,500 cubic feet
BR73 1,500−2,500 cubic feet
YH61 2,500−3,500 cubic feet

The four cylindrical containers listed in the table need to be hauled.

Cylinder Length (ft.) Diameter (ft.) Fill Level
A 40 12 half
B 24 8 full
C 16 16 full
D 6 12 full

Match each container to the locomotive needed to haul it.

start with a line segment pq that we will copy. mark a point r that will be one endpoint of the new line segment. set the compasses' point on the point p of the line segment to be copied. adjust the compasses' width to the point q. the compasses' width is now equal to the length of the line segment pq.

step-by-step explanation:

starting with:    

5 + x - 12 = 2x - 7   

5 + x - 12 - x = 2x - 7 - x (subtract x from both sides)   

5 - 12 = x - 7 (combine and cancel x's from both sides)   

5 - 12 + 7 = x - 7 + 7 (add 7 to both sides)   

0 = x (add numbers together on both sides)       

so in order for the equation to be true, x must be 0.   

trying x = -0.5   

5 + x - 12 = 2x - 7 (original equation)   

5 + -0.5 - 12 = 2(-0.5) - 7 (plug in value of x)   

5 + -0.5 - 12 = -1 - 7 (did multiplication)   

-7.5 = -8 (did addition on both sides)       

since -7.5 is obviously not equal to -8, the value of -0.5 for x is wrong.   

trying x = 0   

5 + x - 12 = 2x - 7 (original equation)   

5 + 0 - 12 = 2(0) - 7 (plug in value of x)   

5 + 0 - 12 = 0 - 7 (did multiplication)   

-7 = -7 (did addition on both sides)       

since -7 equals -7, that demonstrates that the value of 0 for x is correct.   

trying x = 1   

5 + x - 12 = 2x - 7 (original equation)   

5 + 1 - 12 = 2(1) - 7 (plug in value of x)   

5 + 1 - 12 = 2 - 7 (did multiplication)   

-6 = -5 (did addition on both sides)       

since -6 is obviously not equal to -5, the value of 1 for x is wrong.

d 25 pi/6

step-by-step explanation:

the diameter is 10 inches

the radius is 1/2 of the diameter or 5 inches

the area of the circle is

a = pi r^2

  = pi 5^2

  = 25 pi

the slice is 60 degrees of the entire circle.

60 degrees out of 360   60/360 = 1/6

the area of the slice is 1/6 of the circle

a slice = 1/6 a circle

a slice = 1/6 * 25 pi

you ignore the remainder, therefore the answer is y = x+2

step-by-step explanation:

you have to divide the denominator by the numerator. you can use synthetic division or long division.

[-5] .     1 .     7 .     11

x + 2 + 1/x+5