HELP. Model 3: Another plan to secure the roller coaster involves placing two concrete struts on either side of the center of the leg of the roller coaster to add reinforcement against southerly winds in the region. Again, using the center of the half-circle as the origin, the struts are modeled by the equations and. A vertical reinforcement beam will extend from one strut to the other when the two cables are 2 feet apart.

⦁ Graph the two struts on the model of the roller coaster. Take a screenshot of your graph and paste the image below, or sketch a graph by hand. (5 points)

Recall that a reinforcement beam will extend from one strut to the other when the two struts are 2 feet apart.

⦁ Algebraically determine the x -value of where the beam should be placed. (15 points)

⦁ Explain where to place the beam. (10 points)

(I have already completed the rest with assistance from this )

Intersecting secant-tangent theorem states that if a tangent segment and a secant segment are drawn to a circle from an exterior point, then the square of the measure of the tangent segment is equal to the product of the measures of the secant segment and its external secant segment.so to break it down: 1. pq acts as the tangent and ps as the secant with an intersection at p.sr = 21rp = 3x + 3pq = 4x + 4following to equation: tangent squared = the two segments multiplied by each otherso (4x + 4) ^ 2 = (3x + 3) • (21) simplifies to 16x^2 - 31x - 47 = 0 or (16x - 47)(x + 1) x = -1 or x = 47/162. pq acts as the tangent and ps as the secant with an intersection at p (again! )sr = 16rp = xpq = 15(15) ^ 2 = 16 • x225 = 16xx = 225/163. the interesting chords are proportional to each other so a ratio is possible to set up: ap dp 10 3 + x = = —— = pc pb 8 xcross multiple to get 10x = (3 + x)(8)x = 12