Mathematics, 20.10.2020 02:01 ellisc7044

5x - 14 = -5 + 8x what is the value of x

Answers: 2

Show answers

Another question on Mathematics

Mathematics, 22.06.2019 00:00

Solve for x where 0 equation: cot^2x+2cotx+1=0

Answers: 1

Answer

Mathematics, 22.06.2019 01:30

Which point does not lie on the graph k(x) = 8 -3 √x a. (-64, 12) b. (125, 3) c. (343, 1) d. (8, 5)

Answers: 2

Answer

Mathematics, 22.06.2019 06:00

You roll a fair 66-sided die. what is \text{p(roll less than 4})p(roll less than 4)? if necessary, round your answer to 22 decimal places.

Answers: 3

Answer

Mathematics, 22.06.2019 07:00

What are the cordinates for point a?

Answers: 2

Answer

You know the right answer?

5x - 14 = -5 + 8x what is the value of x...

Questions

Engineering, 26.07.2019 17:20

A12-m long and 5-m high wall is constructed of two layers of 1-cm thick sheetrock (k 0.17 w/m °c) spaced 12 cm by wood studs (k 0.11 w/m-°c) whose cro...

Engineering, 26.07.2019 17:20

A4 m3 tank holds a two-phase liquid-vapor mixture of r 134a at 40 c. the quality of the mixture is 40%. determine the masses of saturated liquid and s...

Engineering, 26.07.2019 17:20

Methane, ch4, has reduced pressure p, 0.7 and reduced temperature tr = 1.1 the critical temperature of methane is 190.4 [k] and the critical pressure...

Engineering, 26.07.2019 17:20

Describe briefly the applicability of the following flow visualization methods. a. the hydrogen-bubble method in a channel filled with silicon oil. b....

Engineering, 26.07.2019 17:20

A15 mmx 15 mm silicon chip is mounted such that the edges are flush in a substrate. the chip dissipates 1.4 w of power uniformly. while air at 20°c (...

Engineering, 26.07.2019 17:20

A150.00 mm sine bar is used to inspect a part angle that has a dimension of 35.0± 1.0°. the sine bar rolls have a diameter = 25.0 mm. a set of gage bl...

Engineering, 26.07.2019 17:20

What is a transverse isotropic rock and what parameters are needed to define such property?...

Engineering, 26.07.2019 17:20

Abrayton cycle with regeneration using air as the working fluid has a pressure of 7. the minimum and maximum temperatures in the cycle are 310 and 115...

Engineering, 26.07.2019 17:20

20 kg of refrigerant 22 in a piston-cylinder assemble of 0.5 m receives heat under constant pressure condition 2 bar and its volume gets doubled find...

Engineering, 26.07.2019 17:30

Steady flow is maintained between two concentric cylinders, which are rotating at constant angular velocity of one (while the other is stationary) or...

Engineering, 26.07.2019 17:30

Derive an expression for bernoulli's equation for an isothermal ideal gas?...

Engineering, 26.07.2019 17:30

Plot schematically the shear versus normal stress curve corresponding to a laboratory shear test and explain how it is disferent for a smooth fracture...

Engineering, 26.07.2019 17:30

The exterior wall of a building is constructed of 12-in concrete (80 lb/ft^3), r-10 insulation and 0.375 in. gypsum board (50 ib/ft^3 density). the wa...

Engineering, 26.07.2019 17:30

A5-mm-diameter electrical transmission line carries an electrie current of 50 a and has a resistance of 0.002 ohm per meter length. determine the surf...

Engineering, 26.07.2019 17:30

Steam, with a specific internal energy of 1300 btu/lbm, is flowing through a pipe located 30 ft above the ground. the velocity of the steam in the pip...

Engineering, 26.07.2019 17:30

Explain briefly the purpose of conducting a laboratory point load test? what is the main parameter obtained from this test? what are the advantages...

Engineering, 26.07.2019 17:30

Arigid, insulated tank is divided into two equal-volume parts by a partition. one part contains an ideal gas at and whereas the other part is evacuate...

Engineering, 26.07.2019 17:30

One mole of an ideal gas with constant heat capacities and is compressed adiabatically in a piston-cylinder device from, to at a constant external pre...

Engineering, 26.07.2019 17:30

Determine an expression for the vorticity of the flow field described by v= -xy^3i+ y^4j. is the flow irrotational?...

Engineering, 26.07.2019 17:30

Agasoline engine operating on an ideal otto cycle has a compression ratio of 11. air enters the engine at 100 kpa, 37 c. the maximum temperature durin...

More questions: Mathematics Another questions