Here's something for new drivers to think about . Even an alert driver takes some time to react to a surprising situation , for instance a car slamming on the brakes in front of you , or a child running out into the street . Assuming a reaction time of 1 second that it might take a driver to hit the brakes , and knowing that there are 5,280 feet in a mile , how many feet will a car travel in one second at 30 miles per hour ? At 60 miles per hour ? (And know that this question only covers reaction time , not the amount of distance a car will take to stop once the brakes are applied , since no car actually " stops on a dime . ")

SHOW ALL WORK

WILL MARK BRAINLIEST

THANK YOU

For 30 mph it’s 44 feet.

For 60 mph it’s 88 feet.

Step-by-step explanation:

For the 30 mph, you have to divide 30 by 60 (minutes), then you divide it by 60 (seconds). After that, you multiply by 5280 and then you’ll get 44 feet.

For the 60 mph, you have to divide 60 by 60 (minutes), then you divide it by 60 (seconds). After that, you multiply by 5280 and then you’ll get 88 feet.

the answer is d

step-by-step explanation:

y+3=-4(x-2)

y+3=-4x+8

  -3         -3  

y=-4x+5

part a

answer: a reasonable domain is where n is a real number. so n can be between 0 and 10. both endpoints are included.

work shown:

n is the number of days after the experiment starts. the smallest n can be is n = 0 which means that 0 days have gone by, and we're at the start. to find out how large n should be, then replace f(n) with 16.13 and solve for n. use logarithms to isolate the exponent.

f(n) = 12*(1.03)^n

16.13 = 12*(1.03)^n

16.13/12 = (1.03)^n

1.34416666666667 = (1.03)^n

(1.03)^n = 1.34416666666667

log[ (1.03)^n ] = log[ 1.34416666666667 ]

n*log[ 1.03 ] = log[ 1.34416666666667 ]

n = log[ 1.34416666666667 ]/log[ 1.03 ]

n = 10.0062999823929

this rounds to n = 10 which is fairly close but not 100% perfect. so this is the largest n can be.

note: if you plug n = 10 into f(n), you'll get roughly 16.127 which rounds to 16.13 (this comes up again in part c)

=====================================

part b

answer: the y intercept is 12. it represents the starting height of the plant in cm.

work shown:

plug n = 0 into the f(n) function. simplify

f(n) = 12*(1.03)^n

f(0) = 12*(1.03)^0

f(0) = 12*(1)

f(0) = 12

on day n = 0, aka the starting point, the height f(n) is 12 cm

=====================================

part c

answer: the average rate of change is approximately 0.43061036458991 (round however you need to). this represents the average growth rate from day n = 3 to day n = 10. so the plant grew roughly 0.43 cm per day during this timespan, assuming you round to 2 decimal places.

work shown:

compute f(3)

f(n) = 12*(1.03)^n

f(3) = 12*(1.03)^3

f(3) = 13.112724 < we'll use this later

compute f(10)

f(n) = 12*(1.03)^n

f(10) = 12*(1.03)^10

f(10) = 16.1269965521294 < we'll use this later

now use the formula below with a = 3 and b = 10

aroc = average rate of change

aroc = [ f(b) - f(a) ]/[ b - a ]

aroc = [ f(10) - f(3) ]/[ 10 - 3 ]

aroc = (16.1269965521294 - 13.112724)/(10 - 3)

aroc = 3.0142725521294/7

aroc = 0.43061036458991

round this however you need to

note: the plant grew approximately 3.01 cm over 7 days, so roughly 0.43 cm per day is the average growth rate (if you were to round to 2 decimal places).