A company makes parts for a machine. The lengths of the parts must be within
certain limits or they will be rejected. A large number of parts were measured and the
mean and standard deviation were calculated as 3.1 m and 0.005 m respectively.
Assuming this data is normally distributed and 99.7% of the parts were accepted, what
are the limits?

answer: (1,3) and (-2,0) i think.

hope it

step-by-step explanation:

x^(1/6) · x^(1/6) · x^(1/6)   ·x^(1/6) = x^(4/6)   since we add the exponents

4/6 can be simplified to 2/3

the simplified form is x^(2/3)

p ÷ r = tan(x)

step-by-step explanation:

given that there is a figure below shows a right triangle: a right triangle is shown with hypotenuse equal to q units and the length of the legs equal to p units and r units.

graph is missing so i will create the graph as per given information.

the angle between the legs having lengths p units and q units is y degrees. the angle between the legs having lengths r units and q units is x degrees.

now we need to find about what is p ÷ r equal to.

so we can use trigonometric ratio tan(x)=[altitude]/[base] to find the value of p ÷ r, because p is the altitude and r is the base.

p ÷ r=tan(x)

hence final answer is p ÷ r=tan(x).