Will give
suppose you select a card at random from a standard deck of cards 60 times, and 12 of those selections are hearts. how does the experimental probability compare to the theoretical probability? include the difference between both types in your explanation.

Experimental probability = 1/5

Theoretical probability = 1/4

note: 1/5 = 0.2 and 1/4 = 0.25

How I got those values:

We have 12 hearts out of 60 cards total in our simulation or experiment. So 12/60 = (12*1)/(12*5) = 1/5 is the experimental probability. In the simulation, 1 in 5 cards were a heart.

Theoretically it should be 1 in 4, or 1/4, since we have 13 hearts out of 52 total leading to 13/52 = (13*1)/(13*4) = 1/4. This makes sense because there are four suits and each suit is equally likely.

The experimental probability and theoretical probability values are not likely to line up perfectly. However they should be fairly close assuming that you're working with a fair standard deck. The more simulations you perform, the closer the experimental probability is likely to approach the theoretical one.

For example, let's say you flip a coin 20 times and get 8 heads. We see that 8/20 = 0.40 is close to 0.50 which is the theoretical probability of getting heads. If you flip that same coin 100 times and get 46 heads, then 46/100 = 0.46 is the experimental probability which is close to 0.50, and that probability is likely to get closer if you flipped it say 1000 times or 10000 times.

In short, the experimental probability is what you observe when you do the experiment (or simulation). So it's actually pulling the cards out and writing down your results. Contrast with a theoretical probability is where you guess beforehand what the result might be based on assumptions. One such assumption being each card is equally likely.

im not quite sure if this is right but i got 5.6 oisutuve

step-by-step explanation:

to plot points   for x just start at the origin (middle) and go to the left however many times it say(if the number is a positive) if the number is a negative then go right however many times it says if it is 0 go nowhere

now keep you pencil there and go up however many times it says on y(if it is positive) if it is negative then go down however many times it says. if it says 0 go nowhere.

you have just plotted a point! now when you finish plotting all of them connect them with a ruler

plot each point as (-3, 7), (0,4), (3,1), (8,-4)   in the parenthesis on the left of the comma is x and the right is y.